• Gender: Male
• Age: 37
• Designation: CAE Engineer
• Highest Education Level: Graduate - Degree
• Preferred Country: India
• Preferred Location: Nagpur
• Work Experience: 11 Year(s)

Education

B. E. in Mechanical Engineering from J. D. College of Engg. Nagpur (RTMNU) with 64.80%
(2013-2016)

Skill Sets

4 year Experience in CAE – FEA modeling & Analysis
Working knowledge of CAE analysis procedures and methods in OEM Automotive
industry and General Engineering domains.
Good hands-on-experience over FE Modeling, Integration, Debugging and
Post-processing using HyperMesh & Hyperview, Hypergraph..

Work Experience

CAE Engineer
From 25THSep. 2019 to 21ST Sep.2021
Company profile- Focused on providing Engineering Design Services to the industry

CAE Engineer
From 1st Aug. 2017 To 30th Aug 2019
Company profile- eLearning solutions products and learn what users think.

CAE-Internship – G2G Innovation, Pune – 1st June 2016 To 30th June 2017

Service Advisor – Arya Cars, Nagpur – 15th July 2008 To 30th Aug. 2011

Floor Supervisor – Khamla Automobile, Nagpur 1st July 2007 To 30th June 2008

Project
To Perform Head Impact Analysis on A & B PILLARS.
CAE Tools :- Hypermesh, LS-Dyna, Hyperview
Carry out modelling of A & B Pillars.
Impactor of 165 mm diameter of 6.8 KG is Impacted on different impact points of A & B pillar assembly.
3 MS clip acceleration values were evaluated and checked weather it is below 80g.
Effective plastic strain was also evaluated within impact zone
To prepare detailed analysis report.
Post processing was done using HyperView
2. To Perform Abdomen Impact on Car DOOR PANEL
CAE Tools :- Hypermesh, LS-Dyna, HyperView
Detail Modelling of Door Panel.
Load case setup and simulation as per ECER95 for side impact on armrest of door panel to reduce the risk of injury to the occupant
Detail post processing and energy balance check in HyperView
Report preparation for project is done and delivered to client.
3. Evaluate Structural Strength of DOOR PANEL Analysis
CAE Tools:- Hypermesh, LS-Dyna, Hyper view
Prepare complete deck for static test such as belt line, armrest, map pocket pull etc.
Structural analysis has been carried out for different load condition on arm rest, Map
Pocket and Belt line etc.
Check deformation and Stress for various load condition.

Debugging of FLOOR CONSOLE by using LS-Dyna
CAE Tools :- Hypermesh, LS-Dyna
Objective of this project to prepare a runnable model for final simulation
FE modeling of Floor console carried out using shell, tetra and hexa mesh. 1d element use for connection.
Load case setup for different load condition.
Debugging the model by using LS-Dyna

RESPONSIBILITIES:
• Leading different modelling projects including customer interaction.
• Resource planning.
• Project coordination.
• Preparation of FE model with connections according to the client’s requirement.
• Perform quality check on FE mesh, integrate assemblies and deliver to the customer.
• Responsible for good quality and timely deliveries.