• Gender: Male
• Age: 31
• Designation: Electrical Engineer
• Highest Education Level: Graduate - Degree
• Current Gross Salary: INR  400000 /Annum
• Preferred Country: India
• Preferred Location: Silvassa
• Work Experience: 8.5 Year(s)

Education

B.E in electical Engineering from GTU Gujarat affiliated by gujarat Technical University 2011-16 Batch with CGPI 6.56
10+2 passed in 2011, from state board (GU.) with 56%
10thpassed in 2009, from state board (GU) with 56%.

Skill Sets

UTILITIES:-D.G Sets 25 KVA to 750KVA, Screw Compressor ,Reciprocating compressor (Kaser ,IR, Elgi,CP).High Pressure Compressor, ( Elgi, IR, CP). Chillers, Cooling Tower, Air Dryer, AHU (Refrigerant and Water Cooled). Air Dryers, ,STP Plant , 33 KV/11KV Sub Station Maintenance.

SECONDRY OPRATIONS M/C Maintenance:- Cap Assembly m/c, Wadding m/c, Sleeving m/c, Printing m/c, Flipping m/c , Hot Stamping m/c and labeling m/c, labling m/c ,camera system

Work Experience

Electrical Engineer
from - 1st july 2020 to till now
company profile -leading company in india for manufacturing of rigid plastics packaging & an emerging site for engineering products through molding process for the customers like hul, loreal india, himalaya, marico, reckkit benckiser, emami, wipro,j&j , pidilite, oriflame.


Maintenance Engg
from - 1th June, 2016 to 30 June 2020
company profile - leading company in india for manufacturing of rigid plastics packaging & an emerging site for engineering products through injection molding process for the customers like hul, himalaya, j&j , castol,hero,etc.

Job Profile -
planning and implementation of maintenance programs, which includes preventive maintenance, periodic maintenance, quarterly and annually preventive maintenance.
maintain all records like daily checklist, history cards, break down records, preventive, and periodic and annually maintenance records.
doing capa for major break downs for frequently breakdowns, break down analysis.
planning for availability of spares, development new vendors and suppliers to purchase good quality with low price.
worked to safety culture, lock out tag out (loto), job safety analysis (jsa), permit to works (ptw), standard operating procedure (sop), safety management prospects (smp)
implementation of tpm & 5s, brc and iso procedures.
technical experience details:-
ht line & lt panel, capacitor bank, acb, vcb, rmu and isolator .
micro controller panels, temp. Controller, pid controller, m/c auto controllers and design and developments. Auto robotic controllers system, electro mechanical control etc. Vfd, servo drive(amplifier) ,servo gearbox , robotics control( pneumatic and servo),calibration, setting and maintenance.
hydraulic pumps, hydraulic valves, hydraulic cylinders, flow control valve, hydraulic logic control system, accumulator maintenance, pneumatic valve and cylinder maintenance
uv lamp control system & maintenance.

injection molding m/c (capacity :30t to 650t) maintenance & processing : hydro- mechanical ,electro - mechanical ,toggle and ram type, mono & bi layer machine ; resolving electrical ,mechanical ,hydraulic and pneumatic problems ,handling below m/c l&t , toshiba (hyelectric and electric machine),etc. Machine maintenance .

extrusion blow molding m/c(capacity :100ml to 40 ltr. ) maintenance:
hydro- mechanical ,electro - mechanical, mono-bi and tri layer machine
resolving electrical ,mechanical ,hydraulic and pneumatic problems ,handling below m/c cmp, kyungwon, sika, samsung, , kai-mai,soplar etc.

injection blow molding m/c( capacity: 50 t to 135 t)maintenance :
resolving electrical ,mechanical ,hydraulic and pneumatic problems ,handling below m/c victor m/c, & bloma m/c maintenance.

injection stretch blow molding m/c maintenance :
resolving electrical ,mechanical ,hydraulic and pneumatic problems ,handling below m/c 70 dph,50mb,12m and mold ,amplifire settings,gear box maintenance,mold change over etc.