• Gender: Male
• Age: 37
• Designation: Engineer
• Highest Education Level: Graduate - Degree
• Current Gross Salary: INR  240000 /Annum
• Expected Gross Salary: INR  320000 /Annum
• Preferred Country: India
• Notice Period: 30  Days
• Work Experience: 13.1 Year(s)

Education

B.Tech. (Electronics & Instrumentation) From Seemanta Engineering College, Mayurbhanja (Biju Pattanaik University of technology) in Aug 2011 With 64%

H.S.C From Kendriya vidyalaya, Angul in May 2007 With 64%

S.S.C From Kendriya vidyalaya, Angul in May 2005 With 73%

Skill Sets

Knowledge of PLCS   : SIEMENS Model-S7-200, 300,400 (SimaticManager), Logo PLC
Allen Bradley ,Rx logics 5000,Rockwell automation.
Hardware Configuration of PLC : SIEMENS Networking (Modbus/MPI/Profibus) Protocols
Designing & Control Softwares :  SCADA (WINCC), DCS (ABB)

Monitoring & Control Softwares :  PLC, SCADA 
Design & Engineering Softwares :  AutoCAD

Work Experience

Instrumentation Engineer
Since March 2012
Company Profile: Leading provider of Drying Systems & Services. 
Job profile:
Planning, Erection, Installing, Calibrating, Maintaining field instruments used for Pressure, Level, Flow & Temperature measurements, as well as control instruments of  Honeywell, ABB, etc.
Looking after entire Instrumentation activities in the site.
Responsible for monitoring all the Instrumentation equipments and make sure if they are valid and calibrated as per schedule.
Planning and execution of In house calibration for all instruments involving in the process (like Gauges, RTD Sensors, Temperature Indicators).
Good Experience in Calibration of all field Instruments, like, Pressure, Flow, Temperature. 
Creating logics for new process as per the requirements and takeover those into Auto sequence running.
Troubleshooting of any kind of breakdown related to Siemens make PLC devices (either in Field or from system).
Executing Loop Simulation/Checking (Cold Loop Checking & Hot Loop Checking) as per standard procedures & technical specifications
Reviewing P&IDs, instrument loop diagram, logic diagram, and designing control loop.

Instrumentation Design:
Preparation of P&ID, Instrument Specifications & Data sheets, Instrument Index, Loop Diagrams, Logic diagrams etc.
Conducting kick-off meetings & technical discussions with customers for approval project drawings.
Ability to troubleshoot and communicate on Allen Bradley Micrologix SLC 5/03, Micrologix (1000, 1200&1400), GE-VersaMax Microcontroller & Siemens S7-(200,300&400).
Hardware Configuration of different PLC’s. Creating Tag Managements. 
Creating Instruments and control loops, and performing wiring operations
Sizing of control valves, flow elements & selection of all field instruments as per hazardous zone classification.
Preparation of hookup drawings & Cable schedules.
Selection of Control valves, Safety valves and Field Instruments. Sizing Calculations for Orifice.
Supervision of Total Electrical and Instrumentation Work at site.
Preparing cable schedule, I/O list as per DCS Loop Diagrams, Tray Work, and Instrument BOM & Hook-up.
Checking & Updating Instrument index, Checking Loop Drawings & JB wiring.

Erection & Commissioning:
Anchoring erection & commissioning of PLC Based Instrumentation Air & Gas Dryer Equipments at site like NALCO (Odisha), BPCL (Mumbai), ESSAR STEEL (Odisha), IFFCO (UP), ESSAR OIL (Durgapur) and Bhilosa (GJ). Completion of project in minimum turnaround time effective resource utilisation to maximise the output.
Project completed under consultant EIL, BOC, MECON, UHDE, TCS & Jacobs

Certification:
Advanced Training in Industrial Automation conducted by Technocrat India Pvt. Ltd. from Chennai For 5 months.
PLC (Siemens) training conducted by Central tool room & training center From Bhubaneswar For 1 month.

Profile Summary:
Working as Electrical & Instrumentation Engineer with 3 year’s & 9 months experience in Field Instrumentation, Maintenance, Programmable Logic Controller (PLC), SCADA, and Autocad.
Experience in troubleshooting, repairs and maintenance of instrumentation and control systems (including PLC & SCADA) & Commissinioning & Installation of Field Instruments.
Installation of all field instruments, like FT,TT & PT.
Experience in Erection, Installation & Commissioning of Field instruments.
Troubleshooting of all field instruments and maitainence.
Good experience in break-down maintenance and trouble shooting.
Preparing and maintaining preventive maintenance & back-up records, breakdown history record, control system list & planner, back-up procedures.
Good experience in logic modification, network communication, trouble shooting, systems & instruments configuration, software and data back-up, etc with Emerson, ABB, Rockwell, Siemens PLC systems.
Preparing and maintaining calibration records, instrument history record, instrument list, instrument classification, etc. 
Preparation and Checking of Instrument Documents.
Good Knowledge of PLC, SCADA & All Field Instruments, like Flow Transimitters, Level Transimitters, Pressure Transimitters & Temperature Transmitters(RTD,THERMOCOUPLES) etc.
Expertise in planning, installation, calibration, testing & troubleshooting of pressure, level, flow & temperature measurements and control instruments, as well as reviewing and simulation of P&IDs and Loop Diagrams
Experience in (HART, MODBUS, FF, PROFIBUS/MPI) Protocols, Experience with PLC.
Experience in selection of field instrumentation ,installation &troubleshooting of all type of transimitters, level transimitters, switches .flow transmitters,

Future Goals

Aiming for Mid-level positions in Process Automation & Instrumentation Field with a growth oriented organisation preferably in OIL & Power Sector.