• Gender: Male
• Age: 33
• Designation: Engineer
• Highest Education Level: Graduate - Degree
• Current Gross Salary: USD  650 /Annum
• Expected Gross Salary: USD  2000 /Annum
• Preferred Country: Pakistan
• Notice Period: 34  Days
• Preferred Location: Any
• Work Experience: 10.4 Year(s)

Education

B.Sc. Chemical(Polymer) Engineering From
University of Engineering & Technology, Lahore, in 2015 with CGPA 3.346/4.0

H.S.C. From Pre-Engineering National Science College Gujranwala, Satellite Town, Punjab, Pakistan in 2011 with 83%

S.S.C. From Government High School Ahmad Nagar (Gujranwala Board), Punjab, Pakistan in 2009 with 91%

Skill Sets

Solid Works,  ANSYS, Aspen HYSIS, MATLAB, AutoCAD,  C++ , MS Visio, Adob Photoshop, Solid edge, Mold Flow etc. 

Work Experience

Quality Assurance and Quality Control Engineer
Since July 2015
Company Profile: Manufacturer of PVC, HDPE, MDPE, PPR-C pipes and fittings
Job Profile:
Assurance of the right processes and procedures to ensure quality
Quality assurance and quality control of PPRC and PVC pipes and fittings
Supervision of extrusion and injection molding machines for quality assurance
Materials, HDPE, MDPE, PPRC and PVC chemical, pysical and mechanical testing to ensure quality
Masterbatches preparation of PVC and PPRC compounds
Mixing of different additives in PVC resin – mixing time, RPM and temperatiure control for quality asssurance
Impact test, Hydraostatic pressure test, FTIR, Capillary rheometre, UTM, Specific gravity, Opacity test for quality assurance
Quality tests like tetrahydofuran test, methylene chloride test and heat reversion test
Quality control of HDPE pipes ranging diametres from 25 mm to 500 mm

Intern
June 2015 to July 2015
Company Profile : Manufacturer of Polyester Staple Fibre (PSF) and yarn products.
Job Profile : 
successfully completed the training regarding the process engineering and the utility department.
Polymerization process of the PTA and MEG for the production of PET.
Calculated the intrinsic viscosity of the PET produced from the final esterification reactor and adjustment of residence time of reagent in the Polymerization  reactor.  
The effect of the intrinsic viscosity of the PET on the draw ratio and mechanical properties of the PET fibers and the spinning section motors duty.
The storage tanks filling, feed supply of the PTA and MEG to the reactors and the traced the piping of the plant.
Effect of the draw ratio, crystallization by the heated rollers and the supply of the finishing oil on the physical and mechanical properties of the PET fibers .
The utility section of the plant and studied the furnace design in detail that I incorporated in my final year plant design project.

Intern
July to August 2014
Company Name : Service Tyre Industry Pvt. Ltd.
Job Profile 
By attaining experience in Projects, Material processing, curing and physical & mechanical properties, completed three projects in the World’s Prime TMC Company.

Intern
July to Aug 2013
Company Name : Chenab Industries Private Ltd.
Job Profile : 
Attaining experience in the Best Textile Processing facility in Pakistan

Intern
July to August 2012
Company Name : Coca- Cola Private Ltd.
Job Profile : 
By attaining experience in projects, PET processing, physical and mechanical characterization, in the world’s Largest beverage company Coca-Cola Pvt. Ltd.

Specialties
Good understanding of ISO 9001, ISO 14001 & ISO 18001. 
Polymer & Process Simulation.
Design understanding of heat & mass transfer equipment.
Quality contro & quality assurance.
Characterization of polymeric materials  using DSC, UTM, TDA, MDA, UV Chamber, MDR, FTIR and many other characterization equipment's using the ASTM and ISO standard techniques.
Hands on experience in injection moldind, blow molding and other polymer extrusion techniques in achieving the required tolerances.
Recipe preparation for different polymeric and elastomeric compounds to obtain the required physical and mechanical properties.
Comprehensive chemical, physical and mechanical characterization of the polymer and elastomeric compounds.
Hands on experience of the elastomer and rubbers their  characterization, Roll Mill, Banbury Mixer, hydraulic press machine for curing of elastomers, Curing time calculation for elastomers using Moving Disc Rheometre, hardnness testing and comprehensive knowledge of the Universal Testing Machine.
Lab Scale polymer synthesis, chain length control by playing with the time, temperature, aggitation speed and other variables and controling the intrinsic viscosity of polymers.
Command on preparing co-polymers during polymer synthesis.
A very good command on different techniques for making polymer composites Like Sprint Rift(Resin Infusion Technology) and Lay man Technique.
Industrial furnace Design, final year engineering project.
Physical, chemical and mechanical characterization of polymer composites using the up to date techniques like Single Fiber Pus-out Test and Single Fiber Fragmentation Test.
Good command on two point and three point bending tests for polymer composites.
Qualities of Leadership and Teamwork inculcated through work in professional societies as ASME & Space. 
Fluency in spoken English and strong grasp over communication skills attained through Language Lab training at NSC College Gujranwala
Exceptional Management Skills earned through experience in Professional Societies
Swiftto adapt changes according to the working
conditions

University Research Projects
Final Year Project 2014- 2015
Plant design project for DME production by the catalytic dehydration of the methanol using the alumina and ZSM-5 as a catalyst.(Supervisors:  Dr. Farhan Saed& Dr. Shafiq Irfan)
Study of thermal/UV degradation of the NBR rubber compounds by using different curing agents and selection of the best NBR compound.(Presented in UET annual technofest and got1stposition)
Recipe development for the NBR compounds for the sealant purposes and hoses.
Membrane preparation of prescribed thickness tolerance.
Hybrid solar cell manufacturing using polymer materials as the light absorbers and the usage of the polymer composites as the dielectric materials

Achievements
Won 1st place for Pakistan in the Technical Presentation contest at the Student Professional Development Conference(SPDC) at Singapore [May-2014]
Winner, All Pakistan Technical Presentation contest at Student Leadership Seminar(SLS) and was chosen to Represent Pakistan at SPDC Singapore [Feb-2013].
District Student Leaders Award for organizing 1st ASME (American Society of Mechanical engineers) Student Professional Development Conference outside USA and in Pakistan [Jan-2015]
Best President Award at Space (Society of Pakistan Advanced Chemical Engineers)[Mar-2015]

Co-Curricular Activities
Director Membership & Recruitment, American Society of Mechanical Engineers (ASME), Pakistan [Oct 2011-Present]
General Secretary, Space, UET Lahore Student Chapter [July 2011-Present]
Development Manager, ASME, UET Lahore Student Chapter [Jun 2008-Jun 2009]
Vice President, Aerospace Section, SPACE, UET Lahore Student Chapter [Jun 2012-Jun 2013]

Extra-Curricular Activities
Volunteer for a National NGO (ROAD Association), a Social Welfare Organization
Organized All Pakistan NGOs Festival (a charity function) as a volunteer for Road Association
President of my College Society
Member of College as well as University Cricket Team
Captain of the PLASCO football team

Future Goals

A Young& Energetic Engineer wants to be a part of organization where there is healthy growth and competitive environment to apply his skills, efforts and technical and analytical expertise effectively.