B.Sc. (Bio-Tech.) from B.U. Jhansi with 53.5%. in 2006.
12th from M.P Board with 64% in Year 2003
Certified SAP QM module internal Exam in Essel Propack Ltd.
An experience with knowledge in the field of Plastic / Packaging with a good knowledge in Plastic Testing, Processing and Quality Systems. Especially in Plastic Extrusion, Printing, seamless tube & Lemitubes Packaging Products
Deep knowledge all type of Testing. New product development. Freely dealing with BIS, CIPET, IIP & Third party agencies
QA / QC and R&D Executive
Since April 2012
Comapny Profile: Manufacturer and Exporter of HDPE Woven Coated Textile Laminated Fabric Tarpaulin, HDPE Woven
Job Profiel:
Online Incoming inspection & Testing of raw materials likes PP, HDPE, LDPE, and LLDPE, Master batch, Paper core, Plastic Core, Plastic Mesh, Caps, Insert, Granules, Master Batch, Top Seal foil and Packaging Material 3 ply, 5 ply & 7 ply Corrugated Box, Liners, Bop Tape, Nepal Poly And Finished Goods.
Test of all incoming raw material like MFI, Ash content, Carbon content, Specific gravity, Dart impact, density, moisture content, shrinkage percentage, Core crush strength and Millen bursting strength as per Quality standard.
Ensure real implementation of QA/QC plan and related inspection activities as well as reported in standard format
Supplier audit and supplier visit for new product development.
Follow-up internal, external corrective and preventive action(s) and ensure the effectiveness, well documented in standard format report.
Analyze routine and non routine samples; conduct international proficiency testing; and enter results in log sheets and in Laboratory Information Management System (LIMS).
Prepare analysis report for compressive test result and durability for internal and external specimens.
Involved in calibration of all testing instrument through outside agency.
Analysis with purchased department for cost reduction of raw material and packaging material.
Conduct audit by BIS to maintain all three license IS 7903:2011, IS 15907:2010 & 15351:2008
Maintain and updating test record of all three license as per BIS requirement.
Coordinate with BIS department for new license amendment as well as annual renewal.
Good knowledge of testing of finish product Tensile test, Mullen Bursting strength, grab strength, tear strength, puncture test & Ball bursting according with ASTMD / IS standard
Printing Ink makes with reference of Ink Formulation in base ink to finished ink for desired finished Pantone Matching Shade (PMS) for Flexo Print Operation using Dispense
Printing shade matching with the reference& Spectrophotometer (X Rite) Technology.
Achievements :
SMED Implementation to minimize down time regarding Incoming raw material
Quality at source implementation to improve quality level at shop floor level
Successfully maintain all three license of BIS form last 1.5 year – Vermibed (IS: 15907:2010) & Pond Liner (IS: 15351:2008) & Mulch film. No NC by BIS during factory audit as well as any other reason
Reduced wastage, increased productitivity & quality (OEE analysis).
Raw material formulation freezing & controlling.
Associate Executive - Quality
June 2008 To March 2012
Company Profile: Manufacturer of laminated and seamless tubes, speciality packaging, etc
Job Profile:
Perform regular inspection of raw materials (Web page roll, caps, insert, granules, master batch, Top seal foil) and packaging material
(3 ply corrugated box, Liners, bop tape, Nepal poly) finished goods as per laid down standards.
Good knowledge of Seamless & Laminates tubes testing like measurable test, destructive test and printing defects also per shade card,
Ensure the compliance of established Quality system at all levels of production.
Online Inspection of tubes Production with measurable test, destructive test &. Performance Tests.
Conducting trials for New Developments & coordinate with our R & D, C.N.I (Creative & Innovations Dept.)
Analysis of goods production performance with Process audit, H.M.P, G.M.P audits
Analysis of process performance with the help of Q.C. Tools (Six Sigma & 5S etc)
Conducting Dimensional & Functional Test of caps, Laminates, Printing web.& Tubes
Updating of specification with the help of customers supporting Dept.
First Part approval of various incoming material after proper testing on the basis of STP & SRD.
Maintaining Records & Documents as per ISO 9001-2000 Requirement & working in SAP QM module.
Achievements :
Reduce 50% to 60% complaint in process overview related in to incoming raw material.
Reduce 70% to 80% complaint in last one year in major Customers, such as-Hindustan Unilever Ltd, Emami Ltd, Dr.Reddy laboratories, Johnson & Johnson Ltd, Colgate Palmolive (I) Ltd, Dabur(I) Ltd, Cipla ltd, group pharma.etc
QA and R&D Engineer
March 2007 to June 2008
International Packaging Products Pvt Limited
Job Profile :
Job Profile :
Handling of testing equipments.
To prepare format & maintain quality documents.
To assist in third party inspection.
Online testing & testing of Finished Products
To assist new product development and new trial.
I Want To do Work As Asst Manager and Try To Give 100% To Company.
Copyright © 2003 - 2015 Smartech Global Solutions Ltd. All rights reserved. Designed by Plastemart.com