• Gender: Male
• Age: 29
• Designation: Machinist Operator.
• Highest Education Level: Diploma
• Notice Period: 30  Days
• Preferred Location: Cumbum
• Work Experience: 9.2 Year(s)

Education

Diploma in Mechanical engineering–AL AMEEN ENGINEERING & POLYTECHNIC COLLEGE-ERODE. Academic duration: 2012– 2015. CGPA: 80%

Skill Sets

Operating: Windows, Android, Sap
System MS-Office: Word, Excel, Power Point, Outlook.

Work Experience

Machinist Operator.
Jan 2019 to Dec 2020
Job Profile :
Preventive maintenance, Predictive Maintenance check sheets & plan preparations.
Check the Pipe Threads and ID of the Casing Before Installation of Liner.
Mixing Cement in the Machine and Check the Viscosity& Flow Rate to be Monitored.
While Inserting the O-Ring on the Pipe Both Ends and Cut Excess Liner and a level.
To be Applying Glue for End seal Installation of the END Flange.
Operation of GRE Liner System for New or Used Oil Tubular Goods.
Tubing and Casing Coupling Buck on and Buck off Operations.
Prepare an area for primer application in pipes.
Mix Primer for minutes until uniform using jiffy mixer and check Viscosity with Zahn cup.
Check Primer temperature, pipe temperature and humidity.
To be Applying primer in pipe after check from Both side and Inside.
To be check Visual Inspection and Hold pipes out of the preheated oven for minimum minutes.
Responsible for troubleshooting & resolving process related issues with in time & cost parameter.
Critical spare parts maintain & inventory controlling.
Managing the maintenance of various equipment for reducing downtime & enhancing operational effectiveness of the equipment.
Coordinating with various TPM and TQM concepts.
Conducting root cause analysis of failures and evolving technical solutions to restore operational efficiency of equipment’s.
Sustaining critical spares for all machines.
Daily audit check for JH (JISHU HOZEN) & Safety abnormal points.
Monitoring power units for each machine and taking actions when required.
Kaizen and Cost reduction initiatives.

Technicians & Store Keeper.
Jan 2018 to Sep 2018
Job Profile :
All car services and handling basic works.
Responsible for checking, repairing and replacing of the machine’s part as per the requirement.
Responsible for changing and refilling fuel and oil in the machines.
Make sure that problem has been solved.
Handling the team of 4 technicians.
Maintain inventory with minimum and maximum stock level.
Mark and store parts in stockrooms according to prearranged systems.
Maintain all relevant records such holding stock, daily requisition and issue vouchers.
Monthly random inventory verification and conduct annual audit.
Submit reports of non-moving / fast- moving parts.
Orders, receive, and stores auto spare parts used in the repair/maintenance of company fleet.
Maintain parts properly in storage status, keeps stock room clean orderly.
Coordinate / report the part request and delivery dates with all concerns

Tool Room & Quality control.
Jun 2015 to Nov 2017
Company Name : DELPHI-TVS Diesel System Ltd
Job Profile :
Maintaining all quality documents (Work Instructions, Process control plan & Standard operating procedures SOP).
Inspect, test, or measure materials or products being produced
New development in reforming process after end of the no of Re grinding.
Controlled Drawing & Spec originals monitoring
Capability to enhance the Tool life and reduce the cost/comp.
To review with production department for daily tool relative issue.
To reduce cycle time and increase the Productivity.
Cost Reductions activities - direct sourcing & Alternate source selection activities.
New Tool Manufacturing from Scrap blank.
Guide to Design Department for the new development tools.
Tool planning Tool related Problem solving &Trouble shooting skills in shop floor manufacturing.
Dept 5S activities.
Incoming inspection and record maintenance.
Taking corrective and preventive action for Quality problem jobs
Knowledge in Problem Solving Technique Using 7 QC Tools.
Corrective action implementation.
Customer complaint handling & monthly graph exhibit.
Monthly Rejections PPM Trend graph. - in house –incoming –customer.

Handing Of machines:
New Tool and Regrinding Tool Inspection in Zoller Smart check (Pilot 3.0 software)
Tool Pre-setting in Zoller smile machine (pilot 3.0).
Tool Visual inspection in CNC Vertex optical measuring system.
Work in thermo grip Tool holder Heat shrink machine.
Machine Handled Conversational machine CNC, Milling, Surface grinding, Lathe, Cylindricalgrinding, and Drilling.
All type Calibration of measuring Instrument handling, Digital Vernier, Digital micrometers, 2D height master and Profile projector.
Tool Re sharpening (Drills, stepped drills, End Mills, Form sinkers, Profile Tools, Gun drills and Profile
Gun drills in 5 Axis and 6 Axis, Walter & TGT CNC Machines).
Inspection of Roughness Machines.
I have good knowledge AUTO CAD.

Technical Certification:
Certified In Autocad
Certified In CNC Programming
Certified In First AID & NSC CPR

Achievements Skills:
Tool life improvement Award.
Scrap tool and reforming Cost Reduction Award.

Co-curricular Activity:
I attended in-plant trained in Kumaran Tata motor limited, Tirunelveli.
I attended in-plant trained in Haj Honda Motors limited, Cumbum.
I attended in-plant trained in Crips project systems ltd, Erode.

PROJECT TITLE:
Project Title : Compressed Air production using Vehicle Suspension.

Future Goals

To work for a successful organizations with a professional status to further develop and strengthen my skills. An ideal position would entail challenging responsibilities, recognition of achievements and space for growth.