Ref. No. : CA - 21276 - (Production – with 29.4 years in Plastic Industry)

Education

D.Metallurgy From CMJ University, Shilong, in 2012 (Registration No.: IC – 95599010102205)

NDT - ASNT Level – II in MT From NDT Management, Pune in 2004

Alcohol Technology (I.F.A.T.) From Vasantdada Patil Sugar Institute, Pune in 1994

B.Sc. Chemistry (Principle) From Pune University in 1991

Skill Sets

Quality Management System, Audit & Inspection, HT Production & Process, Quality & Continuos Improvement, New Process Development
Manpower / Material Management, Supplier Quality Assurance
Manufacturing Quality, ISO / QS / TS Documentation, Team Management

Work Experience

Manager - Heat Treatment 
Since Sep 2010
Company Profile: Engaged in manufacturing of Precision & High Quality Heavy Duty Metal Components in Power Sector, Energy, Oil & Gas, Automobile & Heavy Engineering Products. Customers Like - Halliburton Energy Services, USA, Parts Like Fluid End, Sing-3, Rapid Stage, Rapid Start & DMC etc. GE-Transmission, Parts Like Journal, Idler Cone Hub & Flange etc. Suzlon Energy Services, Parts Like RLA Bolt/Bush, Flange, Washer etc.
Job Profile:
Fully Responsible for Production, Quality, Maintenance, Manpower Utilization, New Process development, Improvement in existing processes & New Project in Heat Treatment Departments.
Daily Scheduling & Monitoring of production to achieve the planned target & On time Shipment.
Decide & Monitoring Heat Treatment process cycle for Hardening, Quenching, Tempering, Normalizing, Annealing & maintain respective documents.
Monitor Received Incoming materials Inspection, In process Inspection, Final Inspection in Rockwell, Brinell Scale, Bias System & ERP delivery challan preparation & despatch.
Metallurgical and Heat Treatment process problem solving.
Arrange & monitor of Chemical, Metallurgical & Mechanical testing for 3rd party (Elca Lab) & maintaining test records.
Arrange & Storage of Heat Treatment Furnace Spares & Consumables.
Taking corrective action for non–conformance arise during Receiving material, in-process inspection & Final InsPEction.
Preparation of documents, establishing, implementing & maintaining Quality Management System (QMS)/ISO : 9001:2008. related Work Instruction, Control Plan, Process Flow Chart, Skill Matrix Etc.
Process Qualification & 9 Points Temperature Mapping of Heat Treatment F/c. (210 KW & 180 KW –Pit Type – 02 Nos. Hardening & 180 KW -Tempering F/c.- 2 Nos. Each) Using Protek Make Strip Chart Recorder, Data Logger, Digital PID Controller, Thermocouples & SAT Thermocouple.
Preparation/Top Up & Closely Monitoring of Polymer Quenching Media Concentration through refractometer & Viscocity Bath.
Use ERP System for daily working & Shop Floor upkeep.

HighLights :-
Streamlined the entire process and improved the heat Treatment process.
To Maintain & Monitor minimum H.T. cost per kg basis & minimum consumption of daily used consumables & Manpower strength.
Eliminate/Maintain Rework 1% & Rejection 0.5% using all latest techniques.
Streamlined man management and developed a system in Heat Treatment plant.
Preparation, Monitoring & maintain of following measuring indicators like Monthly Production in MT,
OEE, OTS, Power Consumption, Consumables, Plan VS Actual production %, Rejection & Rework %, Number of Improvement Idea/suggestion per month, Inventory/ Physical Stock, Safety accidents, Incoming Inspection Rework %, No of NC- Audit Score, Calibration Plan Vs Actual %, No of CAPA Initiated Vs Closed, Heat Treatment Lead Time, Capacity Vs Actual (Tonnes), etc.
Good Leadership abilities, Excellent communication, analytical skills to Interact with customers & study requirements.
Adopting situation with positive attitude

Achievement
Fully Responsible for 3 MT/Batch Capacity Electrical Heated 2 Nos. Pit Type Hardening (210 KW & 180KW) & 2 Nos. Tempering F/c.- (180 KW Each), 2 Nos.Polymer Quenching Tank 35 KL Capacity each - Installation, Erection & Commissioning was successfully completed with very short time & Approved by Halliburton Energy Services – USA;GE – Transmission; Suzlon Energy Services, Daman & Pondi/OEM & External NABL/ TCR & ARAI Laboratory.
Previous Out - sourcing Rework % is 23 - 25% & Presently In house rework is 0.5 to 1.0 % achieved / Maintained.
H.T. Fixture Design Modification for Optimum utilization of Furnace.
Increasing Production (Small components) by changing the loading Pattern.
Preparation, Maintain & Monitoring of key Quality documents Like Q.S./ISO/TS :16949,related in Heat Treatment & Metallurgical Laboratory Department activity.

In charge - Heat Treatment & Metallurgical
Laboratory.
June 2006 to Sept 2010
Company Profile : (Manufacturing of Angular contact Ball Bearings.) Manufacturing of Automobile Sector Bearings like Clutch Release, Stearing, King Pin Bearings to Indian & Over sea’s market. Started supplying to major Auto OEM ‘s in India. Catering to HCV, MCV, Tractor & Tipper Application.& Customers like Tata Motors, Force Motor, Ashok Leylend, Rane, etc)
Job Profile :
Fully Responsible for Production, Quality, Maintenance, Manpower, New Process development, Improvement in existing processes, New Project in Heat Treatment Departments.
Selection of all required Metallurgical Laboratory Equipment's & Installation of Laboratory setup.
Preparation & Maintain Bearings Related Components Raw Material Specifications & continuous update any change in National, International standards, Customers Scope & Inform to Vendors end. 
Daily Scheduling & Monitoring of production; to achieve the planned target, On time delivery & Eliminate Rework/Rejection using all latest techniques.
Metallurgical inspection of Incoming, In process, Finish & New products.
Testing of Heat treaed parts - Hardness In Rockwell Scale & Brinell Scale, Case Depth & Microstructure.
Process control of special processes like Cryogenic Methanol Splitting, Heat Treatment process, Super cooling, Washing and Tempering Operation.
Arrange & Monitor Mechanical, Metallurgical and Chemical testing through third party.
Process Qualification & 9 Points Temperature Mapping of continuous Heat Treatment Furnace assembly & Cryogenic Methanol Split M/c. Using Digital PID Controller & Oxygen Probe, Carbon Potential Controller & Indicators.
Calibration of Heat Treatment process & Metallurgical Laboratory Instruments.
Preparation & Monitoring of Coolants, Oils & Washing Media.
Arrange & Monitor for Crack Testing of Bearings components on Magna Flux Machine.
Maintain & closely monitor daily required out sourcing heat Treated bearings & Development components. .
Skills in key Quality Management Functions Like Q.S. /ISO/TS :16949, related in Heat Treatment & Metallurgical Laboratory Department activity.
Handling & Storage of Heat Treatment Furnace Spares & Consumables.
Adopting situation with positive attitude.
In house Training of TS 16949.
Heat Treatment Furnace 50 % Spare Capacity available, Utilize the capacity by Commercial Heat Treatment material processed customers like -
M/s.SKF India Ltd - Bearings Inner & outer Races etc.
M/s. Saraswati Auto – J.D. Boss & Elastic Hub etc.
NHB BRGS LTD - Steel Ball Range - Ø 19/32 To 1 .

Highlights :-
Streamlined the entire process and improved the heat Treatment process.
To Maintain & Monitor minimum H.T. cost per kg basis & minimum consumption of daily used consumables & Manpower strength.
To maintain Zero % Rework & Rejection using all latest techniques.
Preparation, Monitoring & maintain of following measuring indicators like Monthly Production in MT, OEE, OTS, Power Consumption, Consumables, Rejection & Rework %, Inventory/Physical Stock, Safety accidents, Incoming Inspection Rework %, No of NC- Audit Score, Calibration Plan Vs Actual %, No of CAPA Initiated Vs Closed, Capacity Vs Actual
(Tonnes), etc.
Raw Material Specifications continuous update any change in National & International standards & Customers Scope. 
Vendor development for Raw Materials, Latest Raw Material Specifications, Forgings, Specifically Spherodized annealing & Heat treatment process problem solving & analytical tools.
Good Leadership abilities, Excellent communication, analytical skills to interact with customers & study requirements.
Heat Treatment Furnace 50 % Spare Capacity available, Utilize the capacity by Commercial Heat Treatment material processed above customers.

Achievements
To select the 150 kgs/ Hrs. Capacity continuous Heat Treatment Furnace & required Modification, Design change, Suggestion overseeing, installation from overseas furnace Manufacturer.
Fully Responsible for 150 KG/Hr. Capacity Electrical Heated Mesh Belt Conveyor Continuous Hardening & Tempering Furnace - Installation, Erection & Commissioning was successfully completed with very short time & Approved by esteemed Customers/OEM/ External NABL Lab.
Preparation & Maintain Bearings Related Components Raw Material Specifications, like Bars, Tubes, Forged & Turned Rings, Sheet Metal, Bearing Components (Inner & Outer), Steel Ball & Rollers, Steel Cage & Cover, Brass Cage, Spring Steel – Circlip/Snap Ring/Retainer, Gray Cast & Nodular Cast iron Hub, Hub Inserts, Polyamide Cage & Clutch Fork Rest Plate, Rubber Seal & ‘O‘ Rings, Eton Bush, King Pin, Carburizing Grade Material bearings Inner & Outer Races, & Grease etc & continuous update any change in National, International standards, Customer Scope & Inform to Vendor.
To select Metallurgical Lab equipment & Set up In house Metallurgical Laboratory.
Zero % Rejection & Rework achieved in Heat Treatment Department.
Continuously On Time Shiment achieved.
Increasing Production (very Small components) near furnace capacity & Maximum utilization of furnace by changing the loading Pattern.
Heat Treatment Furnace 50 % Spare Capacity available, Utilize the capacity by Commercial Heat Treatment material processed customers like -
M/s.SKF India Ltd - Bearings Inner & outer Races etc.
M/s. Saraswati Auto – J.D. Boss & Elastic Hub etc.
NHB BRGS LTD - Steel Ball Range - Ø 19/32 To Ø 1 .
Above 3 Nos.Customers commercial Heat treatment material 100 % processed OK, without rework, Rejection & On time Shipment.

Shift In-charge
Jan 2006 To June 2006
Company Name : Asmi Metal products Pvt. Ltd
Company Profile :Manufacturing of Automobile Sector Bearings like Taper & Cylindrical Bearings Races & Customers Like. SKF India Ltd
Job Profile :
Fully Responsible for Spherodized Annealing (3 M.T. Capacity - 2 Nos. LPG Gas Fired Pit Type Furnace), Forging Plant Production activities, Received Incoming Bar materials Inward, Receiving Inspection, Bar Cutting, Forging In process Inspection, Metallurgical Laboratory activities & Maintain daily dispatch Schedule. 
Daily Scheduling & Monitoring of production to achieve the planned & target.
Implementation & Maintaining of ISO: 9001 system.
Implementation of SPC technique.
Arrange & Maintain daily required spares.
Process improvements & Reduce Annealing Cycle time, Eliminate Rework/Rejection using all latest techniques.

HighLights :-
Streamlined the entire Forging production process and improved the Spheridized Annealing Process, Metallurgical Testing & On Time Delivery.
To minimize the Rework & Rejection for Bar Cutting Piece, Forging Production, using all latest techniques.
Preparation, Monitoring & maintain of following measuring indicators like Receiving Bar Material Sizes in MT, Monthly Production in MT, OEE, OTS, Power Consumption, Consumiables, Rejection & Rework, Inventory /Physical Stock, Safety accidents, In process Inspection Rework %, No of NC- Audit Score, No of CAPA Initiated Vs Closed, Capacity Vs Actual (Tonnes), etc.

Achievements
Initially Part time consulting to Furnace Installation, Erection, Commissioning & Well Set Spherodized Annealing Cycle.
After joining Asmi Metal – Semi Finish Turned Bearing Rings Spherodize Annealed Material / Components M/s. SKF India Ltd, - Self Certified declared.
To select Metallurgical Lab equipment & Set up In house Metallurgical Lab.
Preparation, Maintain & Monitoring of key Quality documents Like ISO : 9001 : 2000, related in Heat Treatment & Metallurgical Laboratory Department activity.
Continuously daily required spares, Consumiables, Scheduling & Monitoring of production to achieve the planned target
& On Time Shipment.
Process improvements & Reduce Annealing Cycle time, Eliminate Rework/Rejection using all latest techniques.

Chemist - Heat Treatment Dept
July 1997 to Dec 2005
Company Name : ABC Bearings Ltd.
Company Profile :Manufacture of Cylindrical, Taper Roller Bearings, Ball & Thrust Bearings(An O.E.M customers like Tata Motors, Ashok Leyland, M & M, Force Motors ltd, Eicher, Tafe, Punjab Tractors, Cararrow India, Z. F. Steering Gears ltd, VFJ, Escorts, Swaraj Mazda, & Greaves etc.)
Job Profile :
Fully Responsible for Heat Treatment Production, Metallurgical inspection of Incoming, In process & Finish products, Daily Scheduling, Monitoring of production & On time delivery, Preparation Monitoring of Centralized & Individual Machine Coolant system, Washing media, Effluent Treatment & Magna Flux Crack Testing.
Chemical Testing of Raw material & Tool Steel sample by Wet analysis & Spectrometer if required.
Knowledge of Hardening, Tempering, Normalizing, Spherodized Annealing, Stress Relieving & Pack Carburizing etc. of forged, Turned components & Tool Steel parts/Toolings etc.
Line Inspection in Endo Thermic Gas Controlled atmosphere continuous Hardening & Tempering Furnace.
(i.e. Cast Link & Shakar Hearth Furnace).
Heat Treatment of Tool Steel jobs on Muffle Furnace.
Prepared & Maintain Bearings related all components Raw Material Specifications & continuous update any change in National, International standards, Customers Scope & Inform to Vendors end. 
Calibration of  Instruments.
Exposure to mechanical testing such as Brinnell,&
Rockwell, Vickers Hardness Testing & NDT (MPI).
Handling of Customer complaints & Service failure analysis. 
Implementation & Maintaining of ISO : 9001 & QS : 9000 system.
Sampling Plan,; Implementation of SPC technique In process, Final Inspection Liaison with customer.
Knowledge of work improvement tools like Six Sigma, Kaizen 5S‘.
Good analytical skill of measurement system analysis & other statistical tools like SPC, Control Charts, Cause & Effect analysis, Pareto diagram etc.
Liaison with Maharashtra Pollution Control Board, Mumbai.
In House Training of ISO:9001, QS:9000 & SPC Technique.

Highlights :-
Streamlined the entire Heat Treatment production process, Centralized Coolant System & improved the H.T. Process, In house Metallurgical Testing & On Time Delivery.
To Maintain & Monitor minimum H.T. cost per kg basis & minimum consumption of daily used consumables & Manpower strength.
To maintain minimum Rework & Rejection % using all latest techniques.
Preparation, Monitoring & maintain of following measuring indicators like Monthly Production in MT, OEE, OTS, Power Consumption, Consumiables, Plan VS Actual production %, Rejection & Rework %, Inventory /Physical Stock, Safety accidents, Incoming Inspection Rejection %, No of NC- Audit Score, Calibration Plan Vs Actual %, No of CAPA Initiated Vs Closed, Heat Treatment Lead Time, Capacity Vs Actual (Tonnes), etc.
Skills to identify causes of Non conformities relating to Heat Treating & Correct processes.
Raw Material Specifications continuous update any change in National & International standards & Customers Scope. 

Achievements
Modification of Continuous 200 kg/Hr. Capacity Cast Link Furnace for Reduction in Distortion & Damages of Bearings Components in Zero damages & Distortion is with in specification.
Cost Saving of Coolant Oil, Washing Media, Rust Preventive Oil, Through effective monitoring of concentration, PH, Viscosity, Specific Gravity etc.
20 % saving in coolant Oil & Washing media consumption & Approximately cost Rs. 2 Lacs/Annum Saving.
Increase production by changing the loading pattern on Cast Link Furnace - Before 120 kg/Hr & After 150 Kg/Hr.
Process improvements & Reduce per kg cost, Eliminate Rework & Rejection using all latest techniques.

Foundry Supervisor - Melting & Metallurgical Laboratory.
January 1995 to July 1997
Company Name : Modern Foundry Machine Works Ltd
Job Profile :
Chemical & Metallurgical analysis of raw materials.
Maintain the monthly consumption of raw material & production.
Melting Shop : To operate 3 M.T. Main Frequency Induction furnace. i.e. Charge calculation for C.I., M.S., S.G.I. Furnace tapping , Pouring & to complete the production Target by proper planning.
Checking of furnace condition, Furnace Lining & Sintering process.

Projects : Industrial Fermentation of Sugar Molasses.

Trainings : Inhouse Training of ISO : 9001; QS : 9000 & SPC Technique.
NDT - ASNT Level – II in MT from NDT Management.

Areas Of Expertise
Effectively monitoring of Quality Standards, Procedures, Systems and Overseeing smooth implementation in shop floor and at Suppliers end.
Promoting quality and performance improvement throughout the organization.
Assessing the performance of the Vendors based on various criterions such as percentage for rejections, quality improvement rate, etc.
Effectively interacting with the product development teams to help introduce new products related to Heat Treatment.
Ensuring traceability of product with proper colour code system, continuous monitoring and improvement in the system.
Ensuring tests and inspections are properly understood, carried out end evaluated and that product modifications are investigated if necessary. supporting preparation of HT related Quality documents & also conducting process capability studies.
Undertaking customer complaint analysis & Solved/ closed properly.
Formulating and managing the development & implementation of goals, policies, procedures and HT system pertaining to QA/QC; preparing and releasing monthly production & Quality Review Report.
Managing & maintaining the Heat Treatment quality inspection, product release programs for In-coming, In-process materials & finished heat treated goods.
Providing support in problem & defect analysis in in-coming materials, production quality related issues; process control documentation on PFMEA and PPAP; responsible for reducing rejection in Plant; undertaking analysis of client complaints.
Organizing day-to-day Scheduling of Production Planning activities & Monitoring of production to achieve the planned target & On time Shipment.
Overall control on Production activity till Dispatch.
Preparation & Closely Monitoring of Polymer Quenching Media Concentration, Centralized & Individual Machine Cutting & Grinding Coolant media.
To manage the third party testing of Mechanical, Metallurgical & Chemical testing & verification/ Reviewed of reports as per Customers specification.
Comprehensive Heat Treatment capabilities performed in calibrated continuous, Pit Type, Batch type & Bogie furnaces calibrated Standard Method used for TUS in Furnace to API - 6A, Annexure M standards.
Process Qualification & 09 Positions/Points Temperature Mapping of Heat Treatment Furnaces like Pit Type, Mesh Belt & Cast Link Continuous Hardening & Tempering , Shakar Hearth Furnace Line & Using Digital PID Controller, Strip Chart Recorder, Data Logger & Oxygen Probe, Carbon Potential Controller , Temperature Indicators & Thermocouples.
Eliminate/Reduce Rework/Rejection using all latest techniques.
Skills in key Quality Management Functions Like ISO / QS, TS:16949, Six Sigma, SPC, TQM, APQP, PPAP, FMEA, CQI-9, Root Cause & Field Failure Analysis, CAPA, Reliability Analysis and Problem Solving Techniques related to H.T.
Metallurgical inspection of Incoming, In process, Final Inspection, Finish & New products.
New Project in Heat Treatment Furnace & Metallurgical Laboratory Equipment selection, Installation, Erection,
Commissioning & Production for all responsibility successfully completed, For Three locations.( 150 Kgs/ Hr. Capacity Mesh Belt Fully Auto Continuous Furnace & 3 MT Pit Type LPG Heating Spherodized Annealing Furnace,
3 MT Electrical Heated Hardening & Tempering Furnace. 
Knowledge & Handling of Metallurgical Laboratory Testing equipments like Abrassive Cutting Machine, Grinding & Polishing Machine, Hot Mounting Machine, Cold Mounting, Microscopes – Neophot – 2000 X, Richertz & Olmpus -1000 X, Metal Spectroscope, Brinell Hardness Tester, Digital Rockwell come Superficial Hardness Tester, Vickers Hardness Tester, Bias System, Water Distillation Unit, Centrifuge Machine, Viscosity Bath, Refractometer & Digital pH Meter etc.
Handling & storage of Heat Treatment Furnace Spares & Consumables.
To Maintain & Monitor minimum H.T. cost per kg basis & minimum consumption of daily used consumables & Manpower strength.
Co – Ordination with Customer.

Knowledge for Preparation & Maintain of Bearings Related Components Raw Material Specifications, like Bars, Tubes,Wire Coil, Steel Strips, Forged & Turned Rings, Sheet Metal, Bearing Components (Inner & Outer), Steel Ball & Rollers, Steel Cage & Cover, Brass Cage, Spring Steel – Circlip/Snap Ring / Retainer, Gray Cast & Nodular Cast  iron Hub, Hub Inserts, Polyamide Cage & Clutch Fork Rest Plate, Rubber Seal & ‘O‘ Rings, Eton Bush, King Pin, Carburizing Grade Material bearings Inner & Outer Races, & Grease & Oil, Gas & Wind mill parts, Work Instruction, Control Plan, HT Furnace & Instruments Calibration Schedule Preparation, Preventive Maintenance Schedule prepation, Safety, Quality,
Plan Vs Actual, Delivery Performance data, Inventory, Consumiables, Monthly HT Production & Furnace OEE, Cost of Poor Quality, Lead Time, Dispatch Failure Analysis, HT Standard Cycle (Process) Sheet, Kaizen & 5 ‘S’ Activity etc.
& continuous update any change in National, International standards, Customer Scope & Inform to Vendor. 

Profile Snapshot
A result oriented professional with over 21 years of experience.
15.5 Years of experience in Automobile & Auto Ancillary Industry like alloy Steel & M.S.foundry; Bearings & Bearings steel Forgings.
5.5 Years experience in Precision & High Quality Heavy Duty Metal Components in Power Sector, Energy, Oil, Gas, Wind Mill, Sugar Industries, Automobile & Heavy  Engineering Products & Project Manufacture industry.
Experience in Metallurgical Laboratory Testing & Heat Treatment through a team of well equipped & skilful professionals; avid interest in Production / QC, Heat Treatment and Physical Metallurgy.
Adept at maintaining quality control objectives complementary to corporate policies and goals as set forth by customer demands.
Comprehensive knowledge in the area of Data Interpretation, Data Analysis & Management, Process development, In-process Analysis, Report Preparation & Cross Functional Coordination.
Possess understanding of various Quality Management Tools such as ISO/,QS, TS16949, Six Sigma, SPC, TQM, APQP, PPAP, FMEA, CQI-9,  Root Cause & Field Failure Analysis, CAPA, Reliability Analysis and Problem Solving Techniques related to Heat Treatment & Metallurgical Laboratory. 
An effective  communicator with excellent negotiation skills, Leadership qualities, strong analytical, problem solving and interpersonal skills
Process strong planning, decision making, time management and organisational abilities.
Knowledge & Handle of Main Frequency Induction melting furnace.Pit Type  Hardening & Tempering Furnace, Mesh Belt Continuous Furnace with super cooling system, Cast Link Furnace, Shaker Hearth Furnace, Muffle Furnace Endo Thermic Gas Genrator, Methanol Split Plant, Methanol &  Acetone system & Himgiri make Cooling Towers etc.
Knowledge of Hardening, Tempering, Normalizing, Spherodized Annealing, Stress Relieving & Carburizing etc. of  forged & Turned / Machined components of  25 gms to 500 Kgs Weight. 
Knowledge & Handle of  Metallurgical Laboratory Testing equipment's like Abrasive Cutting Machine, Grinding & Polishing  Machine, Hot Mounting Machine, Cold Mounting, Microscopes like Neopot – 2000X, Richartz, Olympus, Metal Spectro-scope, Brinell Hardness Tester, Digital Rockwell come Superficial Hardness Tester, Vickers Hardness Tester, Bias System, Water Distillation Unit, Centrifuge Machine, Viscosity Bath, Refractometer, pH Meter etc.
Process Qualification & 9 Points Temperature Mapping of  3 MT Pit  Type  Furnace, continuous  Cast Link & Mesh Belt type Furnace Line & Using Digital  PID Controller, Strip Chart Recorder, Data Logger  & Oxygen Probe, Carbon  Potential  Controller & Temperature Indicators & Controllers.
Preparation & Monitoring of Polymer, Coolants, Oils & Washing Media.

Future Goals

Seeking senior level assignments in Manager – Heat Treatment/Metallurgist & Production, Quality, Maintenance, Manpower Utilization, New Process development, Improvement in existing processes, New Project in Heat Treatment Departments preferably in Automobile , Auto Ancillary sector & Heavy Engg. Manufacture industry, the challenging position in a reputed company where I can use my skills & creativity towards making the significant contribution to  the growth & development of company.  

Copyright © 2003 - 2015 Smartech Global Solutions Ltd. All rights reserved. Designed by Plastemart.com