Ref. No. : CA - 14142 - (Production - Moulding – with 28.4 years in Plastic Industry)

Education

Industrial Instrumentation and Process Control from I & E Training Center (Tesda Accredited), Batangas City, Philippines in April 2010

BS Electrical Engineering from Mapua Institute of Technology, Manila, Philippines in April 1995

Government Exams Taken
Registered Electrical Engineer Licensure Examination, November license No. 0016197

Skill Sets

A very flexible and honest person, has 15 years solid experience in set up, start-up, commissioning and production operations of Hydraulic injection molding machines (20T -650T) and its peripherals like servo & pneumatic robot, conveyors, stackers, mold temperature regulator, hopper dryer, auto loaders, crushers, vacuum pumps, compressors & chillers.
Also have experience, in extrusion molding operation and maintenance specially rubber tube and resin repellete production. Gold Medalist in injection molding technical skill competition in SEC, Nagano, Japan.
High skill in mold change or mold set up unloader robot set up, mold maintenance & high precision plastic parts quality troubleshooting. Electrical equipment preventive maintenance & troubleshooting using process elimination.

Work Experience

Section Manager - Injection Moulding : Since Jan 2010
Assistant Manager - Parts Engineering (Plastic) : May 2009 to Jan 2010
Company Profile: Manufacturer of Terminal Printer (inkjet)
Job Profile:
Maximize the use of manpower, machine and material.
Make budget forecast & control expenses.
Find problems and make corrective & permanent countermeasure.
Make Section Plan & section KPI targets (Profit & Loss)
Managing 5 groups - Production 1, 2 & 3, Engineering, QA, Production Support, Mold Maintenance, Delivery.
Make sure quality claims was given permanent action thru Why Why analysis.
Monitor & make action plans for the indices (in process defect, F-cost, downtime, parts cost)
Establish the standard training requirement of all members.
Train, Discipline And Evaluate Performance of Subordinates
Follow and implement company policies and regulations
Reports directly to Assistant General Manager

Job Profile as Assistant Manager - Parts Engineering (Plastic):
Establish the quality troubleshooting system and standardization of system
Provides improvement advise on engineering standards
Make sure all countermeasure of supplier for quality claim is effective.
Make Section Plan & section KPI targets (Profit & Loss)
Make Budget proposals
Monitors, controls the budgets being allocated.
Cost Down Project Adviser
Evaluates and approved parts for assembly
Establishes the standard training requirement of all members.
Trains, Disciplines And Evaluates Performance of Subordinates
Follows and implements company policies and regulations
Reports directly to AGM

Instrument Technician
April 2010 to June 2010
Company Name: I & E Industrial Systems Services, INC
Company Profile: Oil and Gas
Job Profile:
On the job training in the laboratory doing instrument calibration and validation of different instruments and O.H. of valves and leak checking.
Making calibration report and calibration certificates
Assist Senior instrument technician in troubleshooting instruments
Notable customers are Shell, Cocochem & Chevron

Supervisor - Engineering and Quality Assurance Section (Plastic)
Jan 2008 to May 2009
Company Name: Epson Precision (Philippines), Incorporated
Company Profile: Terminal Printer (inkjet) Mfg
Job Profile:
Leads and guides all staff engineers to all engineering activites.
Provides engineering standards to all parts to be produced.
Handles quality claim from customer
Monitors, controls & improves parts quality
Cost Down Project Leader
Evaluates and approved parts for assembly
Establishes workstandards, instructions, Technical notice etc.
Trains, Disciplines And Evaluates Performance of Subordinates
Follows and implements company policies and regulations
Reports directly to Manager

Supervisor - Injection Molding Section (Plastic)
Dec 2003 to Jan 2008
Company Name: Epson Precision (Philippines), Incorporated
Company Profile: Terminal Printer (Inkjet) Mfg.
Job Profile:
Overall in-charge of main & cleanroom manufacturing.
Make monthly activity with regards to IM Fiscal year activity and targets
Makes Monthly Section’s Progress Report
Establishes Work Standard For New Models.
Make sure that all groups participate in all Improvement Activities (Kaizen, KYT, EPPS - Small Group Activity, My House Activity& NESP )
Oversee potential problems and make countermeasure
Prepares Preventive Maintenance Program For Machines
Prepares Mold Maintenance schedule & mold usage schedule
Oversee Quality , Cost, Delivery and Safety
Trains, Disciplines And Evaluates Performance of Subordinates
Follows and implements company policies and regulation
Reports directly to Manager

Assistant Supervisor- Injection Molding Section (Plastic)
Oct 1999 to Dec 2003
Company Name: Epson Precision (Philippines), Incorporated
Company Profile: Terminal Printer (Inkjet) Mfg.
Job Profile:
Overall in-charge of cleanroom manufacturing.
Make monthly activity with regards to IM Fiscal year activity and targets
Makes Monthly Section’s Progress Report
Establishes Work Standard For New Models.
Make sure that all groups participate in all Improvement Activities (Kaizen, KYT, EPPS- Small Group Activity, My House Activity& NESP )
Oversee potential problems and make countermeasure
Prepares Preventive Maintenance Program For Machines
Prepares Mold Maintenance schedule & mold usage schedule
Oversee Quality, Cost, Delivery and Safety
Trains, Disciplines And Evaluates Performance of Subordinates
Follows and implements company policies and regulation
Reports directly to Manager

Staff Engineer - Parts Production (Plastic)
June 1998 to Oct 1999
Company Name: Epson Precision (Philippines), Incorporated
Company Profile: Terminal Printer (Inkjet) Mfg.
Job Profile:
Assist the SV in handling the mfg. group
Implement kanban system
Assist in Mold change & mold maintenance
Manpower supervision
Perform production line equipment troubleshooting
Assures QCDS
Implemet the daily activity issued by SV
Analyze all the problem ( Quality, Machine etc. ) encountered by his group

Production Engineer (Plastic)
June 1996 to July 1997
Company Name: Ogami Corporation
Company Profile: Plastic Injection of Car Parts
Job Profile:
Machine Set-Up, Operation and Maintenance
Perform schedule mold maintenance
Daily Monitoring Of Production Schedule And Output
Make sure the Quality, Cost, Delivery & Safety are all satisfied

TRAINING
BOSH (Basic Occupational Safety and Health )Training
July 2014
Company Name: Synerquest Management Consultancy Services Inc Lima Technology Center, Lipa City, Batangas

Environmental Mangaement System
June 2009
Company Name: System Network InternationaL, INC Based On ISO 14001:2004 STANDARD Lima Tech. Center, Lipa City, Batangas

Failure Mode & Effect Analysis (FMEA)
Sep 2008
Company Name: System Network International, INC,
Lima Tech. Center, Lipa City, Batangas

Mistake Proofing (POKA-YOKE)
Aug 2006
Company Name: System Network International, INC
Lima Tech. Center, Lipa City, Batangas

A Better Plant Performance
Nov 2003
Company Name: Lima City Hotel, Total Productive Maintenance
Lima Tech. Center, Lipa City, Batangas

Nissei Injection Machine Maintenance Training
2002
Company Name: Epson Precision Phil INC
Lipa City, Batangas

Star Seiki Robot Special Training
June 2003
Company Name: Epson Presicion Phils INC
Lima Tech. Center Lipa City, Batangas

Industrial Fire Brigade Training
Nov 1998
Company Name: Epson Precision Phils INC
Lipa City, Batangas

Basic Management Training
Jan 2001
Company Name: Epson Precision (Phil) INC
Lima Tech. Center Lipa City, Batangas

Management By Objective Training
Nov 2001
Company Name: Epson Precision (Phils.), INC.
Lima Technology Center 4217 Lipa City, Philippines

QC In Manufacturing
Feb 2001
Company Name: Epson Precision (Phils.), INC.
Lima Technology Center 4217 Lipa City, Philippines

QC In Engineering
Sep 2000
Company Name: Epson Precision (Phils.), INC.
Lima Technology Center 4217 Lipa City, Philippines

Managerial Skills Enhancement Course
27th October 1999
Epson Precision (Phils), Inc For Managers & Supervisors Lima Technology Center 4214 Lipa City, Phils.

Injection Moulding Process& Manufacturing
04 July 1998 to 15 Oct 1998
Seiko Epson Corp. Control Nagano, Japan.

Fundamental Nippongo, Compact Course I
21st Feb 1996 to 18th March 1996
Pros International INC. Makati, MM. Phils.

Injection Moulding Process & Mfg. Control
2nd June 1996 to 4th Nov 1996
Company Name: Ogami Corporation, Gunmaken, Japan

Core Expertise & Competencies
Injection molding machine & Extrusion machine parameter conditioning
Die or Mold Set up
Hydraulic Injection molding machine preventive maintenance
Set-up/start up & process improvement of production line
Production line Equipment(electrical & pneumatic) & peripherals troubleshooting
Good Knowledge in Safety Audit & Risk Analysis
Mold maintenance (assy /disassy & cleaning)
Good Knowledge of Plant Safety Rules & Regulation
Skilled in Calibration of Different Types of Industrial Instruments
Skilled in Reading Electrical diagrams, loop diagrams, logic diagrams & P&ID
QA & QC management and Quality troubleshooting
Computer literate (Microsoft Office)
Know how to drive forklift
Know how to drive car (with license)
Key Accomplishments
Set up /startup of injection molding consist of 61 machines
Headed the HRR reduction project in IM Section and was given presidential award.
Project leader in downtime reduction activity in cleanroom which results a 70 percent reduction.
Gold Medalist in injection molding technical competition in SEC, Japan
Drive the Key Perfomance Index - In process defect rate of injection molding section from 1000ppm to 300ppm
In 3 months for FY2008
Reduction of delivery delay by 80% due to quality problem & mold problem thru Supplier Innovation Activity

A team player and resourceful person, current position is manager of Injection molding section & project adviser in cost down activities in parts cost thru raw material rationalization such as recycling, use of cheap material or resourcing of supplier. Another theme is thru quality up & efficiency up to lower the parts cost.
Undergone actual training in industrial instrumentation and process control with contents such as basic instrumentation and measurement fundamentals, process control and automation fundamentals, industrial instrumentation and automation maintenance fundamentals and Plant and Process safety fundamentals. Actual practice of 32 instrument calibration/validation. Test method such as loop simulation/ loop checking, control valve overhaul & leak checking.












Future Goals

To strengthen my skills in production, engineering and maintenance in a systematic environment where honesty, humility and teamwork exist

Copyright © 2003 - 2015 Smartech Global Solutions Ltd. All rights reserved. Designed by Plastemart.com