Ref. No. : CA - 15119 - (Maintenance and Service - Electrical – with 18.8 years in Plastic Industry)

Education

Graduation In Electrical Engineering (DLM) From Private / Gujarat in 2012 With 67.20%

Diploma in E & C From MSBTE / Maharast in 2006 With 64.96%

S.S.C From GSED / Gujarat in 2000 With 70.43%

Skill Sets

Strength :
Excellent commitment to work & Result oriented approach.
Decision making personality.
Capable of working under huge pressure and fast paced environment.
Focused approach for continual improvement.
Team Leader, Team builder & Team motivator.
Positive thinking.
Self confident.

MS OFFICE, AUTO CAD, NETWORKING

Work Experience

Senior Maintenance Engineer : Since Jan 2011 
Maintenance Incharge : Sept 2008 to Jan 2011
Electrical Engineer : Aug 2007 to Sept 2008
since 
Company Profile: manufacturer of Automotives trimmed & NVH parts, Parcel Shelf, Carpets, and Insulation parts.
Job Profile:
Able to deliver as well as prepare all types of Audits works and maintain all documents and records.
To minimize the breakdown hours and revised new target of MTTR and MTBF.
Make All Machines, Yearly Preventive Maintenance Plan Schedule and Maintain Properly.
Able to doing all types of Electrical as well as Mechanical Maintenance works.
Able to doing all types of Hydraulic as well as Pneumatic work.
Maintain inventory cost and maintenance cost and revised target.
Team member for effective implementation of KAIZENS, Pokayokes and Employee’s suggestions for improvement in Production, quality, delivery, cost & housekeeping. 
TPM team member, to train operators and supervisors for work machine in proper working condition.
Responsible for utilities, and maintain in proper working condition.  
Make and Draw All Types of New Electric Power Panel and Control Panel Wiring.
Make New Control Wiring Diagram of any Machine and Make panels.
Good at maintenance Estimation, Costing & Analysis.
Good Knowledge in Auto Cad, Easily Making Drawing. (Machines as well as Wirings etc)
Monthly advanced maintenance planning to meet the maintenance.
Manage the Maintenance & repair Work using skill in Troubleshooting, Problem Solving, Analysis and Written and Oral Communication.
Machine Erection And Commissioning like as:- Hydraulic press (8T, 35T, 200T etc), Water Jet (IRB 2000) Robot, Roller Cutting Press, Heater Furnace, Pneumatic Press and Pneumatic Heater Ovens,  PU line (Poly Urethane) line (Foam making) ext………. 
Got ability to direct a team of technical person to meet or exceed project goal.
Also doing all type engineering works like as Project Engg. For Machine installation. All type electrical works (such as machine related as well as industries related) and also all types of Hydraulic as well as pneumatics works.
To follow the outside party regarding to some of the machines utility and calibration.
To inspect all the machines and keep it in proper working condition.
Train The Trainee Engineers and Operators Regarding Maintenance And System.
Make All Maintenance Fitters, Electricians and Boiler operator’s skill matrix as per evolution sheet.

Maintenance Incharge : Sept 2008 to Jan 2011
Job Profile:
Monthly advanced maintenance planning to meet the maintenance.
Maintaining documents and records as per the requirement of ISO/TS-16949. 
To do the calibration works and maintain the report of calibration.
To do the MSA report.
To prepare revive meeting report.
To inspect all the machines and keep it in proper working condition.
To maintain inventory cost and maintenance cost. 
To follow the outside party regarding to some of the machines utility and calibration.
Manage the Maintenance & repair Work using skill in Troubleshooting, Problem Solving, Analysis and Written and Oral Communication.
Got ability to direct a team of technical person to meet or exceed project goal.

Electrical Engineer : Aug 2007 to Sept 2008
Job Profile:
Monthly advanced Maintenance Planning to meet the Maintenance.
Maintain Document and records as per the requirement of ISO 9001: TS 16949.
To inspect all the Machines and keep it in proper working condition.
To follow the outside party regarding to some of the machines utility and Calibration.

Achievement :
To minimize the breakdown hours and revised new target of MTTR and MTBF.
Got 1st promotion at very short time spam on performance basis.
Reduce Maintenance Inventory Costing.
Project Team Leader for Machine Erection, Commissioning and Installation. 
Out of 10 plants, 2 satellite plants Machines installation, commissioning and Document work, within in short time.
TOYOTA Team appreciates for fast PPAP (production part approval process) in satellite plant.
France, KMT robot making team appreciates for fast installation and successfully trial of double cavity 2 robots arm.
Implement lot of KAIZEN.

Familiar With Machines Like:
30 TR Chilling plant.
400Kg/cm2 Non IBR steam generating boiler.
Plastic Poly Propylene Sheet Manufacturing line.
15Lakh Kcal/Hr Thermo pack boiler.
Blank cutting machine.
Calendar rolls.
Temperature controlling oven.
PLC based machines, like automoulding line.
Robot water jet cutting machine.
Poly Urethane machine.
Crushing Machine.
PLC  Program operating Machine Like Auto moldings machine, Robot water jet cutting machine where I got the controlling system idea of PLC like allen bradelly, Medicon, Telemechanich, Mesung, Siemens.
Hydraulics and Pneumatics Machines.
242 CFM Screw compressor LG make.
Coating line Binder Appling machine in which Multi motor speed control with drive.
1500 KVA Transformer, 750 KVA DG set.
Vacuumed CKT Breaker for 11kv supply Isolation.
Familiar with the A.C Motor speed control Drives like Kirlosker, Telemechanic, Invac, Altivar.
Thyristors switching Ckt. Using for Uniform Heating Control.
Good at preparing the Control Diagram as per the machine function and requirement.
High Frequency Welding machine.

Training Taken:
ISO/TS 16949; 2008 / 2009. 
ISO/TS 16949; 2009 INTERNAL AUDITOR.
ISO – 14001 Legal Requirement & Awareness.
ISO – 14001 INTERNAL AUDITORS.
MSA (Measurement System Analysis).
QMS (Quality Management System).
Basic Hydraulic Training.
5S.
Basic PLC and SCADA Training.
TPM.
KAIZEN. 
SMED. 
QRQC.
5 Why Analysis.
7 QC TOOLS. 
POKA YOKE. 
Kanban.
TPS.
Fire Fighting & First Aid.
Lean Manufacturing.
Skill Matrix and more.

Strength:
Excellent commitment to work & Result oriented approach.
Decision making personality.
Capable of working under huge pressure and fast paced environment.
Focused approach for continual improvement.
Team Leader, Team builder & Team motivator.
Positive thinking.
Self confident.

Future Goals

Seeking challenging assignment in innovation & team oriented organization where I can use my inherent & acquired skills to contribute to the organization growth & bring about constant improvement in myself both individually & professionally.

Copyright © 2003 - 2015 Smartech Global Solutions Ltd. All rights reserved. Designed by Plastemart.com