• Gender: Male
• Age: 38
• Designation: Senior Engineer
• Highest Education Level: Graduate - Degree
• Preferred Country: India
• Notice Period: 30  Days
• Work Experience: 15.1 Year(s)

Education

B.Tech (Electronics Communication) VITS (RGPV University) in 2010 with 70%

H.S.C. From SHSS in 2005 with 82.2%

S.S.C From SHSS in 2003 with 83.2%. 

Skill Sets

Experience in Plant Maintenance Trouble-Shooting.
Proficiency in Trouble Shooting in electrical engineering & instrumentation.
Induction Motor Maintenance, Control Valves, Drives, Temperature controller trouble-Shooting.   
Work experience in Plastic, Polymers, Master batches industry.
Work experience of single type & Twins Screw Extruder Machines.
Maintaining electrical & mechanical consumable spares & critical spare stock of all machines like Extruder, feeders, hopper, mixer, Compressor and Folk Lift etc.

Calculated Risk Taking Capability, Confident, Creative thinking, Self Motivated, Flexible with any working environment, Time management, Positive Attitude, Initiative Taking Nature and Discipline,

Well versed with M.S. Office 2000 (Excel, Word, & Power Point), Libra office and Internet etc.

Work Experience

Sr. Maintenance Engineer
Since Feb 2014
Company Profile: Speciality Polymers manufacturing company.
Job Profile:
Currently working in new project for new Steer-OMEGA-50 extruder and Schenck Feeders.
Project work co-ordination and planning for new Coperion make Extruder and Schenck feeders with other dept
Procurement, Execution & Erection of H.T Panel, L.T Panel, PDB Panels, LDB Panel, Power Plug Panel, Capacitor Panel (APFC)
Breakdown & preventive maintenance of M/C.
To minimize the down time as minimum as possible
To solve the electrical as well as mechanical problems by Root cause analysis.

Sr. Maintenance Engineer - Maintenance 
May 2013 to Feb 2014
Company Profile : An ISO 9001:2008, ISO 14001 certified company, fledged PP & Engineering compounds manufacturing company.
Job Profile : 
Project work co-ordination and planning for new line of Berstoff Extruder with other dept, man power scheduling, and participation in management training program like safety audit, ISO, AET etc.
To carry out the Maintenance & Trouble shooting of 3 Induction Motors, control Panels, Starters, Vacuum Pumps, Ovens, Air compressors etc.
Breakdown & preventive maintenance of EOT Crane, Berst off Extruder 62mm, 42mm and OMEGA-50 (Steer m/c) Extruder M/c., Prasad Automation, Air compressors, Vacuum pumps  etc.

Sr. Electrical Engineer - Electrical Maintenance
July 2010 to May 2013.
Company Name : Polycab Wires Pvt. Ltd
Company Profile : Leading Manufacturer of LT Power/Control Cables, HT Cables (up to 132 KV), House wire and Flexible Cables, Telecommunication Cables, LAN Cable, PVC & XLPE Compounds. 
Job Profile : 
To do preventive & break down maintenance of 3 Phase; Induction Motors (0.5 HP to 400 HP), Transformer (1500KVA/1000KVA, 11KV/415V, Make: Volt amp & Indian), Control Panels, LT/HT/PDB/LDB/APFC panels, Starters, etc.
Breakdown & preventive maintenance of EOT Cranes (2 MT to 15 MT) & Hoists (1 MT), Air compressors etc.
Breakdown & preventive maintenance of cable & Compounding plant Machineries (like Stranding m/c, Extruder m/c (Royal Extruder, Nanjing Extruder, Buss MX-125 & QK-110 m/c), laying up m/c, Armoring m/c, Copper Taping m/c, DG Set, Chiller etc.) 
Installation & Maintenance of Variable Voltage Frequency A.C. Drives (1.5 KW to 300 KW) like that,
YASKAWA (Varispeed S7, A1000)
Vacon
Power Flex (Allen Broadly)
Knowledge of Temperature controllers (PID500, FUJI, WEST, Selec etc.), Thermocouples & RTD, Proxy Sensors, Heaters (Mica & Ceramic), Relays etc.     
Carry out operations & maintenance of 
D.G Set (Supernova – Make, 750KVA)
H.T VCB (ABB-Make, Range-12 KV and L.T ACB (ABB Range-440V,2500 A, 1600A, 1000A) 
H.T/L.T Switchgear/Switch yard. 
To minimize the down time as minimum as possible.
Co-ordination with stores & purchase departments.
Monthly data analysis with calculating the MTTR & MTBF.
Follow-up with outside agencies for maintenance as and when required with Prompt solution.
Energy and Cost saving activities
Daily, Monthly and yearly data analysis.

Installation Of Machines – Project Work Performance:
Prasad Automation System in APPL and in POLYCAB for Compounding. 
120mm, 100/80mm, 150mm Extruder m/c in POLYCAB pvt. ltd., Berstoff 62mm, 42mm, OMEGA- 50 (STEER) M/C in APPL Industries ltd. and Coperion Extruder with Schenck feeders and atomization system in ALLOY Polymers India pvt. Ltd.

Other Activities:
5’S, TPM.
ISO: 9001:2008.ISO 14001:2004, OHSAS 18001:2007.

Future Goals

To Seek Challenging Position In Progressive Company With My Experience And Contribution To The Growth Of The Company With My Knowledge Dedication And Positives Ethics