• Gender: Male
• Age: 43
• Designation: Senior Executive
• Highest Education Level: Graduate - Degree
• Current Gross Salary: INR  450000 /Annum
• Expected Gross Salary: INR  700000 /Annum
• Preferred Country: India
• Preferred Location: Chennai
• Work Experience: 21.5 Year(s)

Education

B.E. in Mechanical Engineering in 1999-2003 from SACS M.A.V.M.M. Engineering College
Affiliated to Madurai Kamaraj University, Madurai with 67.40%
HSC in 1998-1999 with 85.10%
S.S.L.C in 1996-1997 with 88.0%

Skill Sets

QA/QC engineer

Work Experience

Quality Assurance / Quality Control Engineer. (Mechanical)
May 2007 to till date
Presently working with a leading company at Saudi Arabia
Duties & Responsibilities:
Monitoring the daily piping work activities as per Isometric and P & ID.
Inspection, Testing and Documendation as per ITP and Client requirements.
Familiarize the Project standards, Mechanical procedure and specification.
Rising of RFI to the client and Issuance of surveillance and NCR.
Preparation of packages with all attachments and client formats.
Preparation of all applicable documents for hydro test packages prior to the hydro test.
Preparing the punch list prior to Hydro test.
Witness of Hydro Test, Water Gravity test, Barcol (Hardness) Test and Bolt-Torque for FRP & RTR Pipes and final acceptance with client.
Witness of Holiday Test for CS Pipes as per Sabic Standards.
Review reinstatement for piping after final Hydro test.
Monitoring Calibration schedule for measuring Instruments.
Reporting to Mechanical QC Supervisor.

Quality Assurance / Quality Control Engineer (Third Party Inspection)
January 2006 to April 2007
Mahindra Consulting Engineers Ltd. Chennai. India. (Group of Mahindra & Mahindra)
Client: M.S.K Projects (India) Ltd. Gujarat-India
Project: Industrial Water Supply Project. (M.P – India)
Project Details: Project starts from Narmada (Nemawar village) to Dewas Industrial Estate. Transmission main-128kms (Maximum 600mm diameter FRP (GRP) Pipes were used, in-between some places around 10kms- MS pipes were used). Four stage of pumping: Raw Water Pump, CWP-I, II & III (Clear Water Pump house). Distribution main-35kms. From MBR-Main Balancing Reservoir (gravity flow) and WTP-Water Treatment Plant
Duties & Responsibilities:
Quality Assurance & Quality control in Fiber Glass Reinforced Plastic Pipes(FRP) and fitting.
Incoming Inspection of raw material (roving, resins, surface mat, csm and etc.)
In process Inspection of liner preparation, winding, curing and extraction of pipe, coupler, Air Valve fittings flanges and ‘Rekha’ ring
Inspection and approval of hydrostatic testing & destructive testing (Axial Tensile Strength, Hoop Tensile Strength, Stiffness and Loss On Ignition) of FRP
Inspection of FRP using standards such as IS12709, BS5480 & AWWA-C950
Final Inspection and Preparation of QA/QC documents.
Suppliers visited:
Strategic Engineering Pvt. Ltd. (Dewas-M.P): FRP Pipe and Accessories.
Strategic Engineering Pvt. Ltd. (Manamaduai-T.N): FRP Couplers.
Elasto Polymer Processors (Guj) Pvt. Ltd. (Rajkot-Gujarat): FRP Pipe Couplers and Accessories.
ISMAT. (Perungudi-T.N): ’Rekha’ Ring.
Lakshmi Plastics And Rubber Products.(Thiruvottiyur-T.N): ’Rekha’ Ring

Site Responsibilities:
Erection and testing of FRP pipes.
Preparation of documents with respect to chainage of drawings.
Preparation of Daily Progress Report and Material status about excavation, bedding (sand) level, fitting of pipes, bends & coupler, seating of Rekha Ring, air valves, thrust block (PCC & RCC) and packing.
Inspection of Hydrostatic tests for laid pipes.
Highly dedicated to maintain the quality standards as per standards;
Monitoring & co-ordination of daily activities with engineers.
Dye Penetration Testing and Preparation of WIR
Reporting to The Project Manager.

Incharge (Production & Quality)
June 2003 to Dec 2005
Manson Enterprises India Pvt. Ltd., Hosur. India (An ISO 9001 – 2000 Company)
Products: Rubber mould components, Rubber with metal components, Flaps, O-rings, Profile ring, Gasket washers, and Shaft seals.
Customers: JK tyres, TVS Motor Company Ltd., Renowed Auto Products
(RAP), Tatra trucks, Ashirwad pipes, Fiem Industries Ltd and Balaji Press Products etc.
Duties & Responsibilities:
Member of Management Review Committee.
Implementation of planned activities and Organizing workers.
Ensuring production as per plan.
In process and final Inspection of Rubber mould components.

Future Goals

To pursue a challenging carrier with a significant role in a dynamic and progressive organization contributing towards the growth of company and myself, using my analytical, technical, skills and leadership qualities.