• Gender: Male
• Age: 38
• Designation: Supervisor
• Highest Education Level: Post Graduate Diploma
• Notice Period: 30  Days
• Work Experience: 15.1 Year(s)

Education

Post-Graduate (M.Sc.) From Dept. of Materials Science, Sardar Patel University in 2010 with 60.16%

(B.Sc.)From Bhavan’s R.A.College of Science
Ahmedabad, Gujarat University in 2008 with 55.72%

H.S.C. From G.H.S.S, Jalore Rajasthan Board in 2005 with 48.62%

S.S.C. From G.S.S.S, Jalore Rajasthan Board in 2002 with 49%

Skill Sets

Working with TGA, DSC, UTM, and Hardness Machine, IZOD Impact Machine in Glass fiber composite
project and XRD, SEM, FTIR in Nanoclay Project work.
Working with Flame Photometry, Spectrophotometer, BET, and Caloriometry in practical.

MS Office, Internet

Work Experience

Lab In charge - QC & R&D Department
Since Sep 2011
Company Profile: Manufacturer of epoxy rods, FRP fencing & FRP platform.
Job Profile:
Quality Control: find the Properties of Raw materials, Process product materials, Final Product and set it.
Quality Control: testing of incoming Raw materials like glass fiber, Resin, Catalyst & Hardner, Pigment, Fillers, Additives and other materials as IS standard and specification.
In Process product testing like Mechanical, Physical, fire retardant and other properties as per IS, BS, ASTM Standard and our standard & Specification to control the quality and properties of product.
Finish Product testing like Mechanical, Physical, fire retardant, Chemical and other properties as per IS, BS, ASTM standard and Specification.
Now work on new product development and set for Resin formulation (with filler, pigment, Catalyst,
additives) ratio and condition for (GFRP) FRP & GRP Pultruded product, Molded Grating product, Hand
molding and SMC (Compression Molding) product and etc.
Formulation as making for product that like fire retardant, Non-fire retardant, Smooth finishing, abrasive or ruff surface, dielectric properties, thermal conductive and insulation properties and etc.
Instrument using UTM 20 kN and 10 kN, Izod Impact Testing HDT, Full Section load testing, Barcol Hardness, LV and RV Viscometer, Tintometer (Spectrophotometer), Melting point Apparatus, Oil bath, water bath, Densitometer, Furnace, Hot Air Oven, Sample cutting Equipment, Fire & Flammability testing, Chemical and other important testing etc.
In process and Finish product testing of properties like Tensile Strength, Compressive Strength, Flexural Strength, Bearing Strength, In Plane Shear Strength, Full Section Test, Modulus of elasticity, Uniform and line load, Bending test/ Deflection test, Izod Impact Testing as per Notching sample, Heat Deflection Temperature, Barcol Hardness, Density, Water Absorption, Flammability, Flame Spared, Fire retardant, UV resistance, Oxygen Index, Dimension, Visual Inspection and etc. as per IS, BS, ASTM Standard and as per parameter.
Testing of Resin (Polymer) as a our Raw materials and that testing of properties like Viscosity, Gel time, Volatile Content, Specific Gravity, peak exotherm and that prepare casting sheet and test of Barcol hardness,Tensile, Flexural and Chemical test as per IS 6746 :1994.
Testing of Glass fiber properties like GSM or Tex, Moisture Content, Loss of Ignition and etc. as per IS 11320: 1997 standard.
Finish Product like FRP Pultruded Product (C-Channel, Angle, Cable Tray, Square and Round pipe, I-Beam,Deck Panel, Flat Bar, Rod and etc.), FRP Molded and Pultruded Grating, SMC Meter Box, Roofing and Corrugated Sheet, Tanks, ladder, Tower, Man hole cover and etc.
Preparation the (FRP) Glass Fiber Reinforcement Plastic Composite using two major product Glass fiber ECR Glass fiber and Resin using Unsaturated Polyester (Ortho, Tera, ISO Resin, Vinyl ester Resin, PET base and Gel coat), Epoxy Resin, Phenolic Resin and other Catalyst, Filler, Additives, Pigment and other imp.
Materials Hand molding product manufacturing using mold that also our in house making as base on FRP and other materials.

Research Chemist - R&D center
June 2010 to August 2011
Company Profile : Manufacturer of Starch, Modified Starch & Corn Starch.
Job Profile : 
I was working on many projects and that is Synthetic Aluminum Silicates, Precipitated silica, Silica gel,
Nanoclays (Kaolin), Surface Modified Clays, Starch coated clays and also that application.
Applications of clays product in paper coating use K-Controller Coater Machine to coat clays (coating slip solution) on paper and use paper filling for Hand Sheet former Installed machine.
Working with Instrumentation for Characterizations that is XRD,XRF, Brook field Viscometer, Particle size analyzer, GE Brightness meter, Hercules Hi shear viscometer, Abrasive testing Machine, Gloss meter, Moisture analyzer and etc.
Bleaching Process (process technique)to study the raw materials of clay to remove the Iron and other
impurities by dosage to bleaching process.
Studied the impact of different dispersant in the kneading of clay and identified various potential dispersant sodium and ammonium base.
Matrix analyzing of clays to study the different color and composition of clays to find properties and final product composition.
Chemicals and Mineralogical Analysis :- The Chemical constituent clay Si, Al, Fe, Ti, Na, Ca, Mg, Cl, SO4 etc and other minerals are analysis by Wet Chemicals and Instrumentation technique.
Experienced in operating Pilot scale equipments like Spray Drier, Delaminator, Nano mill, Auto clave,
pulverizer etc
Paper :- studied the impact of particle size, viscosity of clays on the coating slip viscosity and on the optical properties, gloss, smoothness of the coated paper and board.
Paint :- Using our clays product to study the replacement of TiO2 and other inorganic product to make different type PVC (pigment Volume concentration) of paint Water base paint and find out the Optical properties, Opacity , Solids contents, PVC of paint, Smoothness, Gloss value. Also study the different type of inorganic materials to comparison of our clays product.

Academic Projects:-
M.Sc Project :-
Development & Characterization Of Nanoclay From Indian Clay (Bentonite) & Use In Different
Application
Prepare the Nanoclay from the Bentonide clays purified it by sedimentation and give different chemicals
dosage and also mechanical stirring.
Characterizations of Nanoclay use SEM, FTIR, TGA, XRD and Chemical and Physical methods.
Use this clays in water purification and filler in polymer.

Course Projects :-
Synthesis and Analysis of Polymers
Fabrication and Characterization of Composite (Carbon Fiber and Glass Fiber Reinforcement Polymer Matrix Composites).
Preparation and Characterization of Nanoparticals (Sio2, ZnO, TiO2 etc.).
Characterization of Carbon Materials.
Preparation of Thin film.

Course Contents:-
Metallurgy, Engineering Polymer (Thermoplastic, Thermoset, Rubber, Adhesive and Processing Techniques), Composite Materials and Nanocomposite Materials.
Carbon & Carbon Nanomaterials, Glass, Ceramic Materials, Processing &Synthesis of Nanomaterials.
Characterization Techniques, Environmental Science.

Training & Industrial Visits:-
Somany Tiles & Sanitary ware Industry
Working in QA and QC lab to understanding toAnalysis and properties of materials
Extensively analyzed various aspects of the plant such as Raw materials and Body materials preparing,
mixing chamber, Spray drier, Furnace, Kiln, Press, Glaze line and testing of continues and final Product.

Industrial visits
Kemrock Industries and Exports Limited,
Ahm Ceramic
Swiss Glasscoat Equipments Ltd.
CGCRI, Naroda Center

Future Goals

Grwoth