Ref. No. : CA - 37884 - (Quality - Injection Moulding – with 13.9 years in Plastic Industry)

Education

2012-2015 B.E in Electrical engineering from Dr. Jivraj Mehta Institute of Technology, Gujarat, India with 7.47 CGPA (70.00%) under Gujarat Technological University, Ahmedabad, Gujarat, India.
2008-2011 Diploma in Electrical Engineering from Government Polytechnic Jamnagar, Gujarat, India under Gujarat Technological University, Ahmedabad, Gujarat, India. With CPI 6.78 (62.00%).
2007-2008 SSLC from Nalanda Vidhyalaya, Junagadh, Gujarat, India under Gujarat secondary education board, Gandhinagar, Gujarat, India with 73.54%.

Skill Sets

RS-CIT & RS-CFA Certification course pursued from kota.
FoSTAC ,Level-2 Certificate for Food Safety Supervisor

Work Experience

ASS.MANAGER QA-QC
From :- Mar 2023 To Till Date
Company Profile :- Manufacturer specializing in custom-built low-voltage panels, medium-voltage panels, and control & relay

Job Profile :-
Handling Quality Department based on ISO Standard. Managing Electrical Quality control / Assurance work based on
IEC/IS Standard for Different kind of products like HV,MV & LV Panels upto 440 Kv.
Conduct Kaizen and 5S Activity in house plant and prepare reports on related to project and ISO Standardization.
Providing training to improve the process of manufacturing, Quality, Production, Fabrication based on Kaizen and related practices.
Handling 8+ Quality team through proper work method and standard procedures to improve the quality of product and processes and reduce the Man-hours, Material, Wastages and Costing

QA-QC ENGINEER ELECTRICAL
From :- Jun 2021 To Dec 2022
Company Profile :- Manufacturer of Electrical equipment

Job Profile :-
Hands-on experience in aspects of Design based Quality Assurance and Checking with specialization in the domain of Electrical Power System through a series of projects.
Preparing and presenting power point presentations for clients regarding Electrical Protection, KAHRAMAA Standard, Quality Procedures and Execution Plans and Testing Methodology.
Co-coordinating and preparing a project progress, project status, daily progress, weekly progress reports and managing a client with respect to project work by utilizing an experience and standards.
Incoming and Outgoing Checking of Materials to store through ERP Software ABM and Costing and billing of the work carried out after work completion.
Performing FAT and SAT activity in Factory, substation and switchyard, presenting a testing methodology in front of client for product verification and submission.
Preparation of ITRs, FAT Invitation Reports, Client and QC Comments, Mark Up Drawings, Modification Drawings, and submission for the charging activity approvals from client.
Ensure the timely execution of maintenance (preventive maintenance, shutdown)/ project plans as per schedules, Support electricians & supervisors during breakdowns, update production team & superiors on deviations.

ELECTRICAL TESTING ENGINEER
From :- Oct 2018 To Apr 2020
Company Profile :- AL AHLEIA SWITCHGEAR CO

Job Profile :-
Carried out design based installation and commission packaged substation (PSS) and (RMU).
Ensuring a Quality of Electrical Switchgears and Electrical subcontractor services for the Better performance.
Prepared power system fault analysis and fault level calculation reports using symmetrical components and per unit values of equipments.
Setting calculation and configuration of power system equipment like Power line (up to 220 KV), Generator (up to 40 MVA), Power Transformer (up to 43 MVA) and Motors (up to 6.3 MW).
Preparing relay settings co-ordination for an entire plant for over current and earth fault relays.
Supervised commissioning of 132 /11 kV and 11/ 0.440 kV Onshore and Offshore Package Substation/switched yard and its switchgears in Al Zour New Refinery Project-Kuwait.
Preparation of calculations for voltage drop, XLPE cable size, ACSR conductor, Relay protective resistance,NGR value, lighting load, MCB selection and load demand.
Selection of equipment, Testing, Operation and maintenance of VFDs, Relays, Panels, CB, CT, PT, transformer,motors according to calculations and requirement of customer.
Preparation and verification of electrical equipment layout, cable tray layout, earthling layout, lighting layout.
Configured and commissioned Transformer protection relays, Feeder protection relays, Motor protection relaysand of Schneider, Areva, Alstom, ABB, Siemens and SEL using their respective software Easergy studio,Agile,Digsi, PCM 600, AcSELerator, Digsi 4.93.
Conducting Factory and Site Acceptance Tests for Transformer, Bus bar, Motor, Generator prior to commissioning.
Commissioning of Motor starters like Variable frequency drives (VFD) of Delta and ABB, Soft starter, Rotorresistance starter, start delta starter, DOL starter with different type of motors.
Programming and Commissioning of all type of power and kWh meters of different models and different make.
Review and edit equipment datasheet for selecting exact equipment required when a replacement of equipmentis required at site.
Preparation, Review & Closing of Technical Specification, Punch Points, Managing and Correction of NCRs and Hand over Electrical Inspected Switchgear for Commissioning and Charging Activity of Substation Equipment.
Review & analyze of SAT/FAT, break down trends, preparation & verification of electrical BOM for switchgears,earthing and lightning, operating procedures for reliability of plant and machines.
Monitor & ensure availability and effective performance of installed electrical equipment & systems.
Take lead, ensure, and contribute for the workplace safety e.g. PTW (Permit system), JSA (Job safety analysis), toolbox talk, contract employee safety, BBS (Behaviors based safety), electrical safety

ELECTRICAL DESIGN ENGINEER
From :- Jan 2018 To Sep 2018
Company Profile :- DESIGNTECH MEP CONSULTANT, AHMEDABAD

Job Profile :-
Preparation of electrical panels and SLD drawings, Substation and switchyard layout, Cable scheduling, sizing calculation.
Preparation & Review of technical bid evaluation, Comparison of Specification and switchgears load scheduling.
Checking of functionality of electrical switchgear operations, troubleshooting and preparing and submitting project documents and based on actual performance related to IEC & IEEE and IS Standards.
Electrical supervisor competent candidate approved by Gujarat energy and petrochemical department, Gujarat,India.
Interaction with client / consultants regarding customized tasks and approvals.
Walk through with the client for the verification of Project work and up gradation or Modification in Project Design as per client requirement

T & C ENGINEER
From :- Feb 2017 To Dec 2017
Company Profile :- SYSTEM PROTECTION PVT LTD

Job Profile :-
Hands on experience & operational Knowledge of electrical switchgears from 0.400 kV to 440 kV ratings.
Planning & implementation of testing, commissioning & charging with assured quality and standard
procedures of indoor and outdoor electrical switchgears such as power transformers, instrument transformer, HT
and LT panels (PCC, MCC, PMCC, PDB, DCDC, RMU, IRP, IMCS, UPS, CRP, Battery) and its aux., ACB, VCB, contactors,
MCCBs, ELCBs, MBCs, isolator, earth Switch and lightning arrestor, HT and LT motors, Bus Bars, Power & Control
Cables.
Checking of all types of scheme such as transformer protection, motor protection, feeder protection,
differential scheme, stability scheme, REF schemes, ATS schemes and Earthing and lightning protection
study and audit, tan delta test, Hi pot test and other protection-control circuit scheme of electrical switchgears.
Testing & commissioning of various Numerical & Electromagnetic protection Relays. Such as L&T make Mcomp, MPR300, Schneider make Mi-com, Siemens make 7SJ, 7UT, ABB make REF615, RET610, REM etc, Ashida
make ADR204T, ADR245B, ADR244B, Sell make 849, 749M and many more models provide various protections
like earth fault, over current, under voltage and over voltage, single phasing, locked rotor protection, differential
protection etc.
Possess excellent interpersonal, leadership, communication and managerial skills while working with a client,
colleagues and management.
Great team work ability on group projects with the Practices of 5S & KAIZEN.
Proficiency in mathematics and computer technology.
Experience of erection, commissioning and testing of 66 KV gas insulated switchgear (GIS) panel.
Designing valid and reliable product test methods, checking of functionality of electrical switchgear
operations, troubleshooting and preparing and submitting project documents and based on actual
performance related to IEC & IEEE and IS Standards.
Efficient in time management and able to fulfils deadline requiremen

ELECTRICAL ENGINEER
From :- Dec 2015 To Feb 2017
Company Profile :- SME-RELIANCE INDUSTRIES LTD., JAMNAGAR

Job Profile :-
Planning of site visits according to priority. Arranging work force, equipment, vehicle for the site visit.
Prepare the scope, objective, and budgets for the site visit through documentation.
Testing of Relays of different make like Schneider, Alstom, Areva, ABB, Siemens, SEL, C&S etc.
Testing different protection function such as Differential protection for Generator, Motor and Transformer, REF protection, Over current and earth fault protection,
Testing different type of Transformers up to 160 MVA capacity including Auto transformer, oil type transformer, dry type transformer, three winding transformer, inverter transformer and isolating transformer.
Testing of Current and Potential transformer (CT & PT) of different type, capacity and make.
Testing of indoor and outdoor type circuit breaker of different make and capacity.
Testing of power cables for potential with stand using DC high potential kit.
Testing of HT and LT panels according to scheme, identify the problem with panels and rectify it, Modify the panel with customer requirements.
Testing and calibration of meters like Energy meter, multi-function meter, voltmeter, ammeter etc.
Testing of different type of motors with different voltage range and up to 1600 KW capacity.
Testing of outdoor and indoor type Isolators, Earth switches Surge arrestors etc.
Earth resistance measurements of earth pits using three point methods for electrical equipment and take necessary steps to achieve permissible value.
Performed tan delta testing in equipment like transformers, CT, PT etc. for their insulation capacity, Capacitive charging and its expected life.
Operating experience of different type of testing kits like Universal test kit-omicron relay CMC356, Secondary injection kit, Insulation resistance test kit- Megger, Tan Delta kit- Doble M4000, Phantom loading kit for energy meters, Contact resistance kit(CB), Time interval meter(CB), Primary injection kit, Hi-pot kit, CP-CB2, Oden AT, Megger-MIT-515, Raytech make TR-Mark-3, WR-5030, PD Test Kit, Megger make BDV and oil bath kit etc.
Preparation of preliminary report at site and detailed test report after site visit.

JR.ELECTRICAL ENGINEER
From :- Aug 2011 To July 2012
Company Profile :- SHIV ENTERPRISE, RAJKOT

Job Profile :-
Operation and maintenance of Electrical switchgears of indoor and outdoor substation.
Preparing periodic schedules of maintenance for the electrical switchgears.
Carry out operation and commissioning of Power T/R, Rectifier T/R, HT / LT Panels, DG, Control and relay panels, RMU Panels.
Provide a technical support to the client for the maintenance and trouble shooting of operations of switchgears.
Preparing billing documents based on Purchase order and submits for the payment evacuation
Electrical supervisor competent candidate approved by Gujarat energy and petro chemical department,
Gujarat, India.
Best HSE Performer of the Month-June.2019 awarded by TSHJV, Wood, KIPIC, Al zour refinery projectKuwait.
Attended Onshore and Offshore Industrial Safety training at KIPIC Industrial training Institute, organized by TSHJ, Amec Foster Wheeler and WOOD, at Al zour Refinery Project, Kuwait.
Certified PTW Holder approved by HSSJV, TSHJV, and KIPIC-Kuwait





















Future Goals

Seeking a position in the domain of Design base Quality Checking of Electrical Switchgears and Equipments, verification and
of Electrical Products, Design and Quality base Testing and commissioning, Power System study with an organization of
high reputepreferably in Manufacturing,Consultancy / Power&Energy / Renewable / Production/ Oil&Gas& Pharmaceutical.

Copyright © 2003 - 2015 Smartech Global Solutions Ltd. All rights reserved. Designed by Plastemart.com