• Gender: Female
• Age: 40
• Designation: Executive
• Highest Education Level: Masters - Degree
• Notice Period: 30  Days
• Work Experience: 15.1 Year(s)

Education

M.Tech in Materials Engineering From National Institute of Technology Karnataka (NITK), Surathkal, Manglaore in 2010 with CGPA 7.8

B.E. in Polymer Science & Technology From Sri Jayachamaranjendra College of Engineering (SJCE), Mysore, Viswesvariah Technological University (VTU), Belgaum in 2007

PG Diploma in Rubber Technology From IIT, Kharagpur

Skill Sets

Familiar with Automotive Components  and materials selection process
Knowledge on Plastics, Rubbers and Metals used in automotives components
Thorough understanding of Polymers Processing like Injection molding and other processes
Practical knowledge of polymer characterization using advanced equipments such as SEM, DSC, TGA, XRD and mechanical testing etc.
Worked on development of novel polymer based nano composites and nanofibers
Having basic knowledge of MoldFlow Analysis
End to end processing understanding of long fiber polymer composite processing

Packages: AutoCAD 2005, Hypermesh 11, Moldflow Advisor, MS Office.
Platform: MS DOS, Windows XP

Work Experience

Assistant Professor
Since Jun 2011
Company Profile: Leading university
Job Profile:
Module leader for subjects such as
Material Science
Manufacturing Processes
Plastics and composites and their processing
Handling laboratory on Hypermesh 11
Achievements in Msruas
Handled Corporate training for HCL GETs and DETs on Engineering Materials
Handled corporate training for Rane, Madras on materials used in Brake Liners
Handled classes for BOSCH and Tata Motors on Selection of Materials using Cambridge Engineering Selector software
Handled corporate training for Geometric Solutions on interior and exterior plastic components used in vehicles

Engineer, R & D
June 2010 to June 2011
Company Profile: Leading Manufacturer of Abrasives & Silicon Carbide. 
Job Profile:
Worked on new product developments
Handled equipments like UTM, Stiffness tester, exposed to DSC
Reverse engineering of the coated abrasive products
Testing of raw materials like abrasive grains, PF resins, fillers, fabrics, papers etc
Conducting pilot plant trials for coated products against competitor products
Coordinating with marketing persons for the field trials

Marketing Executive
December 2007 to May 2008
Company Name: Bhansali Engineering Polymers
Job Profile:
Technical support and trouble shooting of problems of the polymer processes
Creating the orders in SAP, based on the customer requirements
Meeting the target collection

In Plant Training
Undergone training on Polymer Composite Manufacturing in Kazan National Research Technical University,  2015
Short term Training programme on processing of plastics, by CIPET, Mysore.
Short term Industrial Training programme on overall Foundry and Forging
Aspects at Hindustan Aeronautics Limited (HAL), Foundry and Forging Division for 45 days.
Undergone one month training on Manufacturing of Tyres in JK Tyres, Mysore.

Academic projects
M.Tech: Materials Engineering
Title: Synthesis and Characterization of Poly (Ethylene-Co-Vinyl Acetate-Co-Carbon Monoxide) Terpolymer/Layered Silicate Clay Nanocomposites.
Abstract:
Poly (ethylene-co-vinyl acetate-co-carbon monoxide) (EVACO)/clay nanocomposites were synthesized by solvent casting and melt mixing method. The X-ray patterns of the montmorillonite  modified with octadecyl ammonia exhibited d001 peak at 2?=4.03 and corresponding interlayer spacing was found to be 2.05nm.In the XRD pattern of EVACO/clay hybrid prepared by melt mixing method , showing no peaks, leading to a formation of delaminated nanocomposites. The EVACO/clay hybrids prepared by solvent casting method, showing intercalation behavior. The formation of the delaminated nanocomposites was manifested through the enhancement of mechanical and thermal stability.SEM analysis of the EVACO/clay hybrids prepared by solvent casting method showed the distribution and dispersion of the elements of the nanoclay. The nanocomposites containing 5% nanoclay showed the aggregation of the elements which leads to the decrease in the mechanical properties of the nanocomposites.

Key words: Nanocomposites, XRD, SEM, Nanoclay, Delamination, Intercalation.
Place of Work: National Institute of Technology, Karnataka, Surathkal

Academic Guide: Dr. Anandhan Srinivasan, Associate. Professor, NITK,
Surathkal, Karnataka.

Publications:
S. Anandhan, Harsha G. Patil, R. Rajesh Babu, Characterization of poly(ethyleneco-vinyl acetate-co-carbon monoxide)/layered silicate clay hybrids obtained by melt mixing, Journal of Materials Science, 46, 7423 (2011).

S. Anandhan, Harsha G. Patil, M. Arunjunairaj, Poly(ethylene-co-vinyl acetate-cocarbon monoxide)/layered silicate nanocomposites: Preparation, Characterization and Properties, Advanced Science Letters, 6, 134 (2012).

S. Anandhan, H. G. Patil, R. Rajesh Babu, Synthesis and characterization of nanocomposites based on ethylene-vinyl acetate-carbon monoxide terpolymer and layered silicate clay, International Conference on Recent Trends in Materials Science and Technology ICMST-2010, India, October 2010 (Invited paper).

Bachelor of Engineering:
Title: Study on cured tyre defects in JK tyres, Mysore.
Abstract:
Cured tyre defect means defect occurred on tyre after curing process. The defects may due to faulty compounding, variations in process parameters etc. The main objective of our project is to reduce the defects and increase the % of FTQ. At first, inspected 500 tyres and we found many defects like sidewall blister, light side, light heel, kinked bead etc of these defects the percentages of light side and light heel defects was more in both truck tyre and in LCV tyres. So decided to analyze these defects. After analysis we got satisfactory results.
Place of Work: J.K. Tyres Ltd, Mysore
Industrial Guide: Mr. Vasudev Rao, GM, J.K Tyres Ltd, Mysore
Academic Guide: Ms.Roopa.D, Asst.Professor, SJCE, Mysore

Achievements, Activities and Membership:
Qualified GATE exam in 2008.
Presented paper on Electrospinning of Polymers to produce nanofibers in Polymer Quest-2009 conducted by IIT, Kharagpur.
M.Tech project paper has been published in Journal of Materials Science, in 2011.
M.Tech project paper has been published in International Conference on New Materials in IIST at Trivendrum.
Best Cadet of the NCC troop in 2003.
Won Third prize in High Jump competition conducted during Incident 09 in NIT Surathkal, Mangalore.

Future Goals

To be a part of a growing organization, that provides ample opportunities for continuous learning and professional growth in a thoroughly motivating environment